11
Step 4: Loosely screw on the smaller half
of the adapter.
Step 5: Insert the cable(s) so about 1mm
sticks out of the other end and tighten the
cable adapter assembly. Hand tighten –
do not use tools. .
Step 6: Attach fastener with cable to
underwater housing so the cable is
centered over the flash window.
Step 7: User scissor to cut away excess
fastener material. Important: Leave
enough fastener material so it completely
covers the flash window or else the stray
light escaping from the flash window
may cause backscatter.
Connecting Flash Link optical cable to NON-SeaLife cameras
(continued)
