779976
22
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
ENGLISHENGLISH 43 |
KIDS’ TOY BICYCLE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | KIDS’ TOY BICYCLE
| 42
b ca e fd
TRAINING WHEELS
Training wheels are designed to prevent the SCOTT toy bicycle from toppling
over, even when your child is yet unskilled (a). According to expert opinion,
training wheels are suitable to learn cycling to only a limited extent; often they
are even counterproductive. If these cycling aids are mounted, try to do without
as early as possible. Otherwise your child will get used to a completely wrong
riding technique. We recommend that you let your child practise with a tricycle,
a scooter or a walker. Experience has shown that if your child masters one of
these vehicles, getting familiar with the bicycle is less difficult.
The SCOTT toy bicycle of your child possibly includes training wheels. Start, if
necessary, by mounting the wheels to the arm. Loosen and remove the wheel
bolts completely at one side. Fasten the arm together with the support device
to the chainstay.
Make sure to properly mount the support device to the chainstay. Turn the
wheel nut without tightening it (b) and repeat the steps with the training wheel
on the other side. Both training wheels are then to be aligned in a way that with
the bike being in an upright position both wheels are in contact with the ground.
Finish by tightening the wheel nuts to the specified torque value.
DANGER!
G
If your child takes bends fast and rides over uneven ground, there is the
risk that he/she topples over with the SCOTT toy bicycle and the mounted
training wheels. Practise with your child how to handle the training wheels.
CAUTION!
A
Only buy training wheels that have been certified, for example according to
DIN/GS.
NOTE!
I
If you wish to install training wheels, ask your SCOTT dealer about suitable
models. Read the mounting instructions of the supplier and ask, if neces-
sary, your SCOTT dealer for further information.
NOTE!
I
The training wheels are only an unsatisfactory riding aid for very small chil-
dren and should be removed as soon as possible to train your child‘s sense
of balance.
Mounting the training wheels
Training wheel mounting (only for 12-inch and 16-inch models) and adjustment
of the chain tension on bicycles without derailleur gears. To mount the optional
training wheels for the 12-inch and 16-inch models proceed as described in the
following:
1. Release on one side of the rear wheel nut 1 and remove it including the wash-
er (c).
2. Assemble now the bolt and nuts/washers as shown below to fix the wheel on
part 2 (d).
3. Put part 3 in part 2 and fix it with nut 1 with the washer between nut 1 and
part 3 (e).
4. The long sleeved hole 4 (f) will help you to balance the bike when you assem-
bled on the other side of the bike the parts as mentioned above.
5. Both training wheels should be with a distance of 1-1.5cm to the ground when
the bike is balanced on its wheels. After balancing the bike please tighten the
wheel fixing nuts and the counter nuts.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scott MTB E-bike 2018 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scott MTB E-bike 2018 in de taal/talen: Engels als bijlage per email.

De handleiding is 1.29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Scott MTB E-bike 2018

Scott MTB E-bike 2018 Gebruiksaanwijzing - Deutsch - 89 pagina's

Scott MTB E-bike 2018 Gebruiksaanwijzing - Français - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info