781863
26
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26 GB
Keep oils and lubricants out of reach of unauthor-
ised persons. Read through the instructions on the
containers carefully and follow them closely. Avoid
direct contact with the skin and wash off thoroughly
after use.
m Check all safety devices after maintenance
and cleaning work.
Maintenance
Turn the engine off and let the engine cool down.
Re-t the mains plug.
Check the general condition of the machine. Be care-
ful with loose screws, misaligned or moving parts,
breakage of parts, and any other condition that could
interfere with safe operation.
Remove any foreign objects and other materials
that have accumulated on the saw blade and the
unit. Clean the machine after each use. Then use a
high-quality and thin uid machine oil to lubricate all
moving parts.
m Never use a “pressure washer” to clean your
unit. Water can penetrate tight areas of the
machine and its transmission case and cause
damage to spindles, gears, bearings, or the
engine. The use of pressure washers will result
in shortened life and reduce serviceability.
Experienced craftsmen can perform minor repairs
on the machine itself.
Check the saw blade regularly. Use only
well-sharpened, crack-free and not distorted saws.
Use only tools that comply with the European
standard EN 847-1.
Exchange immediately rocker that run out.
Check all safety installations after each mainte-
nance and cleaning activities.
Ensure that there are no tools or other materials on
or in the machine before putting it into operation.
Remove possible sawdust blockages at the dis-
charge.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the
following parts are therefore also required for use
as consumables.
Wear parts*: sawblade; seesaw inserts
* Not necessarily included in the scope of delivery!
15. Exchange of saw blade
The exchange of the saw blade can only be under-
taken in rewood cut position.
Loosen the top and bottom screws on the protec-
tive cover approx. 5 mm and open the protective
cover.
To lock the saw blade into place, insert the locking
pin (1) through the corresponding opening on the
saw blade guard. To do this, insert the pin com-
pletely and straight into the hole. Use the corre-
sponding hole (depending on the saw blade type)
so that the pin is at the lowest point (bottom of the
tooth).
Loosen the saw blade with the supplied open-end
spanner / Allen wrench (2).
Remove the saw blade ange
Insert the new saw blade.
Mount the saw blade ange again and tighten the
clamp screw.
Remove the locking pin.
m Attention! When installing the saw blade, pay
attention to the correct direction of rotation!
2
1
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach Wox D 700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach Wox D 700 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 3.19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Scheppach Wox D 700

Scheppach Wox D 700 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Espanõl, Svenska - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info