9322 0205
Dokumentation
Seite:55
Technical information wox wox wox wox
d500 d700 600 500
Construction measurements:
Total length mm 1078 1270 785 785
Total width mm 655 730 755 755
Total height mm 973 1130 1040 1020
Rocker support mm 655 655 670 670
Saw blade Ø max. mm 500 700 600 500
Idle - Motor 1/min. 2800 1400 2800 2800
Idle - Saw shaft 1/min. 2100 2100
Cutting speed- Saw blade m/sec. 72 51 66 55
Weight kg 79 107,5 109 98
Power unit: 1532 0901 1527 0901
Motor V 220-240 / 50Hz 220-240 / 50Hz
Input power P1 KW 3,1 2,8
Output power P2 KW 2,0 2,0
Motor speed 1/min. 2760 2600
Operating mode S6/40% S6/40%
Rated current A 13,6 12,2
Power unit: 1532 0902 1530 0902 1527 0904 1527 0902
Motor V 380-420 / 50Hz 380-420 / 50Hz 380-420 / 50Hz 380-420 / 50Hz
Input power P1 KW 4,2 5,2 4,5 4,5
Output power P2 KW 3,0 4,0 3,6 3,6
Motor speed 1/min. 2680 1400 2800 2800
Operating mode S6/40% S6/40% S6/40% S6/40%
Rated current A 7,8 9,3 8,0 8,0
Work information
Cutting height
Spar max. mm 170 240 220 180
Turning cut max. mm 190 250 375 320
Piece of wood max. mm 320x160 380x240 400x180
! Technische Änderungen vorbehalten !
Specific noise values
The according to the EN 23746 for the sound pressure level resp. EN 31202 (correction factor k3 after supplement A.2
from EN 31204 calculated) for the sound pressure level on the working site ascertained noise emission value amounts
under the foundations of ISO 7904 supplement A performed working conditions to:
Sound pressure level in dB
Idle LWA / Processing LWA
dB(A) 105 / 107 105 / 107 105 / 107
Sound pressure level on working site in dB
Idle LpAeq / Processing LpAeq
dB(A) 85 / 92 95 / 97 95 / 97 95 / 97
The specified values are emission values and therefore should not at the same time be reliable working site values. Although
there is a correlation between emission and immision levels, it cannot unfailingly be derived if extra precautions need to be
taken or not. Factors, which influence the actual availabe immusion value on working site, include the peculiarities of wor-
king area, other sources of noise, e.g. the number of machines and other adjoining processes. The allowed working values
could vary from country to country. However, the information should qualify the user, to be able to make an estimation of the
dangers and risks.
Assembly
The machine is delivered, except for the handle bar, completely assembled and is therefore immediately ready to operate.
Demount the handle bar from the rocker joint and insert it into the left frame side wall.
Setting-up and adjustment
Please pay attention that your rocker circular saw is set up stable and on a leveled floor.
