782059
6
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
8 english françãis 9
Insert adjusting bolt (2).
Attach stop track (3).
2 carriage bolts M6 x 50
2 sheet metal spacers
2 washers 6 in diam.
2 wing nuts M6
Insert folding stop into the stop track.
Final assembly hf 3000/tfe 30, Fig. F1/F2
(1) stop tube
(2) adjusting bolt
(3) stop track
(4) plate
(5) retaining strip
(6) bearing strip
Insert stop tube into the pivoting drill hole of the slide
table.
Insert carriage bolt M8 x 65 from above and tighten with
washer by hand.
Insert adjusting bolt (2).
Attach stop track (3).
2 carriage bolts M6 x 50
2 sheet metal spacers
2 washers 6 in diam.
2 wingnuts M6
Insert folding stop into the stop track.
Attach plate (4) and retaining strip (5) to the table.
2 carriage bolts M8 x 25
2 serrated washers 8.2 in dia.
2 hex nuts M8
Push bearing strip (6) between plate (4) and retaining
strip (5) and tighten the hex nuts.
Work piece clamping device, Fig. G
Insert the clamping bolt into the slide table and tighten.
1 serrated washer 8.2 in dia.
1 hex nut M8
Choose the appropriate drill hole according to the
pivoting direction of the stop track.
Fasten work piece clamping device to the clamping bolt
by hand.
Notes on operation
Angle correction work piece stop, Fig. L
After making a test cut, check the angle. Loosen the cap
nut to make the necessary adjustment. The adjusting nut
(1) can be turned to the required position by hand by
pushing back the stop tube slightly. Then retighten the
cap nut and make another test cut. Repeat the correction
procedure if necessary.
Fig. M
Guiding the work piece safely is a requirement for acci-
dent-free precision work. Use the work piece clamping
device properly.
Insert work piece
Set clamping device onto the bolt with lever in position
(1).
Set clamping device onto work piece with lever in
position (2) and tighten the hand grip on the bolt.
To clamp a work piece, bring the lever into position (3).
Maintenance
Your scheppach pusher slide is practically maintenance-
free.
Occasionally apply a few drops of oil to the work piece
clamping device.
Replace the cleaning brush if necessary.
Keep the ball-bearing guide of the slide table free
of sawdust and dirt by cleaning to guarantee smooth
running.
The following details are required to allow correct and fast
processing of a spare parts order:
Machine type
Machine number
Description, order number for spare part
When ordering spare parts for electric equipment, the
date shown on the nameplate of motor and switch must
be quoted.
Quantity of the required spare part
Exact details of address and type of dispatch
Guarantee
This appliance is covered by a 12 month’s guarantee
The guarantee covers only material and construction
faults. Faulty parts are replaced free of charge,
customers must carry out replacement work.
We guarantee only original scheppach parts.
The guarantee does not cover: Transport damage, wear-
ing parts, damage resulting from improper use or failure
to observe operating instructions.
Guarantee claims are valid only if no repairs have been
made by a third party.
The warranty certicate is only valid with the invoice.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach TS 315 GT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach TS 315 GT in de taal/talen: Alle talen als bijlage per email.

De handleiding is 1.59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info