782518
12
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
8
Safety Notes
Please read this manual carefully and use the unit only according to this manual.
Dispose of used packaging material carefully or store it out of the reach of children. There is
a danger of suffocation!
The unit is not a toy and does not belong in the hands of children. Never leave the unit
unsupervised when in use. Keep it out of reach of children or persons in need of supervision.
Children should be supervised to ensure that they do not play with the unit.
Persons with limited physical, sensorial or mental abilities are not allowed to use the
machine, unless they are supervised and briefed for their safety by a qualified person.
Make sure the voltage corresponds to the type label on the machine.
The unit is designed for operation in altitudes of up to 2000 m above sea level.
Should the unit become damaged do not use it any further and have it repaired by a
professional or contact our customer service. Do not disassemble the unit or try repairing it
yourself.
Special Safety Notes for Crosscut and Mitre Saws
Always use the correct saw blade for the material you intend to cut.
Do not use damaged or warped saw blades.
Worn base plate inserts must be replaced.
Use only saw blades which are recommended by the manufacturer and correspond to EN
847-1. Do not use HSS saw blades.
If necessary, wear suitable protective equipment. These are ear protectionsafety
goggles a dust mask and gloves to protect your hands when handling saw
blades or coarse materials. (Saw blades must, whenever possible, be carried in a
container). Please keep in mind that wearing Gloves while operating the saw is a
safety risk and should not be done.
When cutting wood, always connect the mitre saw to a dust extractor.
Keep your hands and other body parts away from the rotating saw blade.
Secure all work pieces with the screw clamp on the saw.
Before startling a cut, lock the mobile base plate and the pivoting arm.
The ground around the machine should be even, clean and free from debris such
as scrap pieces.
Keep your work place well lit.
Before the first use, familiarise yourself with operation, setup and handling of the unit.
Use only sharp, straight saw blades in good condition. Please observe the maximum
revolution speed of the saw blade.
If the machine or the protective equipment becomes defective, immediately stop work and
Please note the included General Safety Notes and the following safety notes to
avoid malfunctions, damage or physical injury:
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach TKG 210-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach TKG 210-30 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0.44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info