782090
18
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
11. Secure work
Use clamps or a vise to hold work. It‘s
safer than using your hand and it frees
both hands to operate tool.
12. Don‘t overreach
Keep proper footing and balance at all
times.
13. Maintain tools with care
Keep tools sharp and clean for better
and safer performance. Follow instruc-
tions for lubricating and changing acces-
sories. Inspect tool cords periodically
and, if damaged, have repaired by au-
thorized service facility. Inspect exten-
sion cords periodically and replace if
damaged. Keep handles dry, clean and
free from oil and grease.
14. Disconnect tools
When not in use, before servicing, and
when changing accessories such as
blades, bits and cutters.
15. Remove adjusting keys and wrenches
Form the habit of checking to see that
keys and adjusting wrenches are re-
moved from tool before turning it on.
16. Avoid unintentional starting
Don‘t carry plugged-in tool with nger on
switch. Be sure switch is off when plug-
ging in.
Never leave a running machine unat-
tended. Before you leave the workplace
switch off the machine.
17. Outdoor use extension cords
When tool is used outdoors, use only ex-
tension cords intended for use outdoors
and so marked.
18. Stay alert
Watch what you are doing. Use common
sense. Do not operate tool when you are
tired.
Do not operate the machine under the
inuence of drugs, alcohol or any medi-
cation. Be aware that medication can
change your behaviour.
19. Check damaged parts
Before further use of the tool, a guard
or other part that is damaged should
be carefully checked to determine that
it will operate properly and perform its
intended function. Check for alignment
of moving parts, binding of moving
parts, breakage of parts, mounting, and
any other conditions that may affect its
operation. A guard or other part that is
damaged should be properly repaired or
replaced by an authorized service cent-
er unless otherwise indicated elsewhere
in this instructions manual. Have defec-
tive switches replaced by an authorized
service center. Do not use tool if switch
does not turn it on and off.
20. Warning
The use of any other accessory or at-
tachment other than recommended it
this operating instruction or the Einhell
catalog may present a risk of personal
injury.
21. Have your tool repared by an expert
This electric appliance is in accordance
with the relevant safety rules repairing of
electric appliances may be carried out
only by experts otherwise it may cause
considerable danger for the user.
22. Connect the dust extraction devic
Wherever there are facilities for tting a
dust extraction system, make sure it is
connected and used.
Additional safety instructions
Do not use blunt knives. Risk of kick-back.The
cutter block must be fully covered.
Use a push stick to plane any short workpiec-
es.Take additional safety precautions if you
are planingany narrow workpieces. It may be
necessaryto use lateral pressure equipment
and springloadedcovers to ensure that you
can work insafety.
The machine is not suitable for cutting re-
bates.The anti-kick safeguard and the infeed
roller mustbe inspected at regular intervals.
Machines tted with a sawdust extractor an-
dextractor hoods must be connected to the
devices concerned. The type of material used
can have a negative inuence on the dust gen-
erated.
The machine is designed exclusively for the
cutting of wood and similar materials.
The knife must be replaced immediately once
it becomes worn down by 5%.
If a push stick is not used there may be a risk of
serious danger. The push stick should always
be kept at the point provided on the left-hand
side of the machine when not used.
There is a greater risk of danger when small
workpieces are fed in by hand. Always ob-
serve the manufacturerʼs instructions on the
use of the push stick.
If the safety covers, infeed table or mesh are
incorrectly aligned they could lead to uncon-
trollable situations. Damaged or soiled work-
pieces may cause a risk of danger. Never use
metal parts in the machine or any materials
which can fracture or shatter.
Risk of injury! To cut long workpieces, always
place them on a mobile table or similar type
of supporting equipment. Otherwise there is a
risk that you may lose control over the work-
piece. The machine is only suitable for planing
and thicknessing.
Wear suitable protective clothing when work-
ing with the machine.
ear protection to prevent damage to your
ears,
a breathing mask to avoid the risk of inhaling
hazardous particles of dust,
safety gloves to avoid injuries from sharp
edges or knives,
safety goggles to avoid eye injuries from y-
ing parts.
It is imperative that the following situations are
avoided at all times: Premature interruption
of the cutting operation (planing cuts which
do not complete the entire length of the work-
piece; planing of uneven pieces of wood which
do not lie at on the infeed table). The machine
is designed for private use only. It is prohibited
to use the machine for professional or com-
mercial use. Residual risk: Bear in mind that
there is always the possibility of residual risks
associated with the use of the machine even if
you comply with all the safety instructions. By
complying with these instructions and taking
suitable care when using the machine you will
reduce the risk of injury or of damage to the
machine. Particular risks:
Injuries to ngers or hands from parts of
the machine or from workpieces, e.g. when
changing the planing knife
Risk of electric shock if you use power con-
nections which do not comply with stand-
ards
Contact with conductive parts on opened
electrical components
Hearing impairments if you work for lengthy
periods without ear protection
Emission of hazardous sawdust if a dust ex-
tractor is not used.
Even if all safety precautions are complied
with it is still possible for some residual risks
to remain.
Important! If the primary mains connection
is in a poor condition there is a risk of short-
circuits when the machine is switched on. This
may also affect other functions (e.g. the light-
ing up of indicator lamps). Should there be any
faults in the primary mains connection (max.
current impedance < 0.105 Ω), please contact
your local electricity supplier to advice and in-
formation.
If the blade is fastened and positioned incor-
rectly this may result in the blade being ung
out, which may be a cause of danger. There-
fore, before operation, make sure that the
blade is correctly tted and adjusted in accord-
ance with the operating instructions. Every
part of the blade shaft not used for planning
must be covered.
Check the machine and carry out required
maintenance work on it each time before you
start it up. In particular, inspect all the anti-kick
claws and the infeed drive shaft.
Make sure that the dust extraction system and
collector are connected and are used correct-
ly. Make sure that the dust extraction system is
suitable. Fine sawdust may not only be harm-
ful to health, in certain concentrations it can
also be potentially explosive. Always switch off
the machine and pull out the mains plug before
making any adjustments or changing settings.
Sawdust may cause risks to health.
Please keep these safety instructions in a
safe place.
GB
18
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach Plana 4.1C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach Plana 4.1C in de taal/talen: Nederlands, Duits, Engels, Frans, Fins als bijlage per email.

De handleiding is 7.95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info