782076
11
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
11
performance range specified in the chapter Technical
Data of the operating manual.
When working outside, do not stand on slippery ground
and wear solid shoes.
Do not misuse the cable. Protect it from heat, oil, and
sharp edges.
Only use well-sharpened planing knives for better and
safe work.
Maintain the handles dry, clean and free from oil and
grease.
Before switching on the machine, remove all keys and
setting tools.
When working outside, only use the correctly marked
and authorized extension cable.
Keep other people, especially children, away from the
machine when it is connected to the power supply.
Be attentive and pay attention to what you are doing.
Use your good sense and do not work with the machine
when you are not concentrated.
Operating personnel must be at least 18 years of age.
Trainees must be at least 16 years of age, but may only
operate the machine under adult supervision.
Persons working on the machine may not be diverted
from their work.
The working space on the machine must be free of chips
and wood scrap. Disorder can cause accidents.
Protect the machine from rain and moisture.
Do not use the machine in a humid or wet environ-
ment.
Store the machine in a safe place, so that nobody can
get injured or switch on the machine. Make sure that
the machine is not parked in the open or in a humid
environment without protection.
Only use the machine according to instructions and to
the purpose it has been designed for.
Do not use the machine where there is a risk of fire or
explosion.
When working with the machine, do not touch any
earthed parts (e.g. tubes, radiators, electric stoves,
coolers).
Wear only close-fitting clothes. Remove rings, bracelets
and other jewelry.
Wear ear protection, goggles and a dust protection
mask.
To protect long hair, wear a cap or hair net.
For changing the planer/thicknesser knives, wear solid
gloves.
Do not wear any gloves for working on the machine, with
the exception when handling rough work pieces.
The safety mechanisms on the machine may not be
removed or rendered unusable. Cleaning, changing,
calibrating, and setting of the machine may only be car-
ried out when the motor is switched off. Pull the power
supply plug and wait for the rotating tool to completely
stop.
Only a qualified electrician is permitted to connect the
machine and complete repairs on its electrical equip-
ment.
After completion of repair or maintenance work, imme-
diately refit all guards and safety devices.
Before doing any repair work, switch off the machine
Ne pas surcharger la machine. L'utiliser uniquement
conforme aux Données techniques citées dans le ma-
nuel.
Lors du travail en pein air, maintenir une position ferme
et porter des chaussures antiglissantes.
Ne pas abuser du câble. Le protéger de la chaleur, de
l’huile et des arêtes tranchantes.
Pour un bon sultat, ne travailler qu’avec des fers de
rabot bien affûtés.
Maintenir les poignées sèches, propres et libre d’huile
et de graisse.
Avant de mettre la machine en marche, vérifier qu’il n’y
a pas de clés ou d’autres outils sur la table.
Lors du travail en plein air, n'utiliser que des câbles de
rallonge autorisés et marqués.
Tenir les enfants et d'autres personnes à distance quand
la machine est branchée au réseau.
Faire attention au travail exécuté. User le bon sens. Ne
pas travailler sur la machine en état inconcentré.
La personne utilisatrice doit avoir 18 ans au moins. Les
élèves à former doivent avoir 16 ans au moins, et tra-
vailler uniquement sous surveillance.
Ne pas distraire une personne en train de travailler sur
la machine.
L'emplacement de travail doit être maintenu libre de co-
peaux et de chutes de bois. Le désordre peut causé des
accidents.
Protéger la machine de la pluie et de l’humidité.
Ne pas utiliser la machine dans un environnement hu-
mide.
Garder la machine dans un endroit sûr pour que per-
sonne ne peuve se blesser ou la mettre en marche. Ne
pas laisser la machine en plein air ou dans un environ-
nement humide sans protection.
Utiliser la machine uniquement conformément à son
emploi prévu.
Ne pas utiliser la machine dans un endroit où il y a un
risque de feu ou d’explosion.
Lors du travail, éviter le contact des pièces mises à
terre (p.ex. tuyaux, radiateurs, cuisinière électrique, ap-
pareils frigorifiques).
Porter des vêtements bien seyants. Enlever les bijoux,
bagues, et montres.
Protéger votre corps en portant des lunettes protectri-
ces, des protège-oreilles et une masque antipoussière.
Pour protéger les cheveux longs, porter une casquette
ou un filet.
Porter des gants appropriés pour changer les couteaux.
Lors du travail sur la machine, des gants ne sont pas
permis à l’exeption lors du traitement de bois très
rugueux.
Les consignes de sécurité, de travail, et d’entretien du
constructeur ainsi que les dimensions qui sont indi-
quées dans les données techniques, doivent être res-
pectées.
Les branchements et réparations de l’équipement élec-
trique ne doivent être effectués que par un spécialiste
de l’électricité.
Une fois les travaux de réparation et d’éntretien ache-
vés, tous les dispositifs de sécurité et de protection doi-
vent être remontés pour le travail.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach PT85 Woodster bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach PT85 Woodster in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Noors, Fins als bijlage per email.

De handleiding is 5.98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info