781484
25
Verklein
Vergroot
Pagina terug
1/148
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
| 25
Noise & vibration
m Warning:     󰀨 

please wear suitable hearing protection.
Sound pressure level LpA 
Sound power level L 
wa/pA 
Keep the noise emissions and vibrations to am
minimum!

order.


Do not overload the appliance.

󰀨
7. Unpacking

-



damage.       




-


-
ment.
m ATTENTION! The device and packaging mate-
rials are not toys! Children must not be allowed to
play with plastic bags, lm and small parts! There
is a risk of swallowing and su󰀨ocation!
8. Before starting the equipment
m ATTENTION! Always make sure the device is
fully assembled before start-up!
Before each use, check the following:
 󰀨

Locked disconnected protective equipment

󰀨
checking that the machine cannot be turned on
whenever the protective equipment is open
Brake
Switch on the machine at the start of work and
allow the machine to reach speed. Now switch the
󰀨
standstill within 10 seconds. Otherwise, there is a
defect.
Anti-kick claws


for example, that the contact surface has not

claws fall back without hindrance due to their own
weight;
Planing blades
-

The machine may only be used if all these condi-
tions are satised.
      

Use pusher wood or sticks which are in perfect
condition for machining short workpieces.

        
machining work.
        
times. Stand to the side of the machine.

a safe distance from the cutting block and from the
point at which the chips are discharged.
Do not start the planing work until the cutting block
has reached the required speed.
Also ensure that the workpiece does not contain
         -
         
holes.
Secure long workpieces to prevent them tipping
over at the end of the planing process. Use roller
stands, for example, or similar devices for this pur-
pose.
      -

󰀨
out the mains plug and remove the jammed work-
piece.
Set the smallest cutting size after use to prevent

m CAUTION!
-
top using suitable screws / screw clamps since oth-
erwise there is a risk that it will tip over.
       

are identical to the mains data.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Scheppach-PLM1800

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach PLM1800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach PLM1800 in de taal/talen: Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 6.63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info