781480
10
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
10 english
Manufacturer:
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we wish you a pleasant and successful working experience
with your new scheppach machine.
Note:
According to the applicable product liability law the man-
ufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
improper handling,
non-compliance with the instructions for use,
repairs by third party, non authorized skilled workers,
installation and replacement of non-original spare
parts,
improper use,
failures of the electrical system due to the non-
compliance with the electrical specifications and the
VDE 0100, DIN 57113 / VDE 0113 regulations.
Recommendations:
Read the entire text of the operating instructions prior to the
assembly and operation of the device.
These operating instructions are intended to make it eas-
ier for you to get familiar with your device and utilize its
intended possibilities of use.
The operating instructions contain important notes on how
to work safely, properly and economically with your ma-
chine and how to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and working life of
the machine.
In addition to the safety regulations contained herein, you
must in any case comply with the applicable regulations of
your country with respect to the operation of the machine.
Put the operating instructions in a clear plastic folder to
protect them from dirt and humidity, and store them near
the machine. The instructions must be read and carefully
observed by each operator prior to starting the work. Only
persons who have been trained in the use of the machine
and have been informed on the related dangers and risks
are allowed to use the machine. The required minimum
age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of your
country, the generally recognized technical rules for the
operation of wood working machines must be observed.
General Notes
When you unpack the device, check all parts for pos-
sible transport damages. In case of complaints the
supplier is to be informed immediately. Complaints
received at a later date will not be acknow ledged.
Check the delivery for completeness.
Read the operating instructions to make yourself famil-
iar with the device prior to using it.
Only use original scheppach parts for accessories as
well as for wearing and spare parts. Spare parts are
available from your specialized dealer.
Specify our part numbers as well as the type and year
of construction of the device in your orders.
osm 100
Delivery Status
oscillating spindle grinding machine
workbench of massive grey cast iron
6 abrasive sleeves (K80, ø
15/21/28/40/53/77 mm)
5 rubberized grinding rolls (115 mm)
6 table inlays ø 18/25/31/44/57/82
mm
4 spindle discs ø 14/22/46/71
mounting tool
Operation Manual
Technical Data
Dimensions
L x W x H mm 400/365/440
RPM 1/min 2000
Table size mm 370 x 290
Table height mm 330
oscillation stroke
mm 16
grinding height
max. mm 98
ø spindle mm 12,7
vacuum connector
ø mm 38
Gewicht kg 13,5
Drive
Motor V/Hz 230–240/50
Input P1 W 450
Subject to technical changes!
Noise parameters acc. to EN ISO 3744
The indicated rates are emission rates and do not corre-
spond with safe working rates. Although there is a cor-
relation between emission and immission levels, it is not
sure whether reliable precautions are necessary or not.
The following factors can influence the present immis-
sion level at the working place: Time of impact, property of
working room, other noise sources (for instance, number
of machines and other neighbouring activities. The reli-
able working place rates can also vary from one country
to another. Yet this information should enable the user to
perform a better evaluation of the dangers and risks,
Acoustic power level in dB
Idling LWA = 84 dB(A)
Finishing LWA = 87 dB(A)
A measurement uncertainty allowance K = 3 dB applies to
the mentioned emission values.
Ausstattung Fig. 1
1 ON/OFF switch
2 housing
3 grey cast iron table
4 tool spindle
5 table inlets
6 rubber sleeves
7 abrasive sleeves
8 table inlay slot
9 rubber and abrasive sleeves slot
10 vacuum connector
12 lower spindle disc
13 upper spindle discs (3 pcs.)
a. small 16 mm
b. medium 20 mm
c. large 35 mm
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach OSM100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach OSM100 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 3.02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info