781929
20
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
20
The machine may only be operated by per-
sons who are trained, instructed and author-
ised to do so. These persons must be familiar
with the operating manual and act accord-
ingly. The respective responsibilities of the
operating personnel must be clearly defined.
Operating personnel who are in training may
initially only work on the machine under the
supervision of an experienced person. The
completed and successful instruction should
be confirmed in writing.
The machine may only
be operated by a person
Keeping information available
This operating manual must be stored with
the machine. It must be assured that all
persons assigned to carry out tasks on the
machine can refer to the operating manual at
all times.
All safety notice signs and operating notice
signs on the machine must always be kept in
good, legible condition. Damaged or illegible
signs must be replaced immediately.
Operator's duty of care
The machine was designed and built in
consideration of a risk analysis and after
careful selection of the harmonised stand-
ards to be observed as well as additional
technical specifications. As a result, it corre-
sponds to the state of the art and guarantees
the highest measure of safety.
Moreover, the operator must ensure for the
safe operation that:
the machine is only used as intended (cf.
the chapter "Intended use")
the machine is only operated in fault-free,
properly functioning condition and espe-
cially that the safety equipment is in-
spected regularly for functionality
required personal protective equipment
for the operating, maintenance and ser-
vice personnel is available and is used
the operating manual is always kept in
legible condition and in its complete
form at the location in which the ma-
chine is used
only sufficiently qualified and authorised
personnel operate, maintain and service
the machine
said personnel is regularly instructed in
all application issues of work safety and
environmental protection, as well as the
operating manual and in particular the
safety instructions contained therein
all safety and warning notices affixed on
the machine are not removed and re-
main legible.
Modifications on the machine
For safety reasons, no arbitrary modifica-
tions may be made - this also applies for
welding work on bearing components. All
planned modifications must be approved in
writing by the company scheppach.
Only use original spare parts / original war
parts / original accessory parts - these parts
are specially designed for the machine. In the
case of parts acquired from third parties, it
cannot be guaranteed that they are designed
and produced to meet the requisite demands
and safety.
We do not approve parts and special equip-
ment which we have not supplied for use on
the machine.
Environmental protection
For all work on and with the machine, the
regulations for waste prevention and for
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach Muli 4000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach Muli 4000 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1.8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info