782298
17
Verklein
Vergroot
Pagina terug
1/152
Pagina verder
17
to obtain the best results from your cutting-off ma-
chine.
• Alwayskeephandsawayfromtheworkareawhenthe
ma chine is running; before performing tasks of any
kind release the main switch button located on the
handgrip, thus disconnecting the machine.
• Alwayskeephandsawayfromtheworkareawhenthe
machine is running; before performing tasks of any
kind release the main switch button located on the
handgrip, thus disconnecting the machine.
m Assembly
WARNING! For your own safety, never connect the plug to
power source outlet until all assembly steps are completed
and you have read and understood the safety and operational
instructions.
Lift the saw from the packaging and place it on your
work bench.
Installing the Dust Bag (Fig. 2)
• Squeezethemetalcollarwings2ofthedustbagand
put it on the motor area exhaust port 1.
Setting the Tool
Note:
This tool is accurately adjusted before shipping from the
factory. Check the following accuracy and readjust if nec-
essary in order to obtain the best results in operation.
Setting of the angular stops to 90° (Fig. 3)
• Releasetheanglearresterandmovethecuttinghead
to the very right. Lock the angle arrester (1).
• Utilizetheprotractorforsettingtheangleofthesaw
blade to 90° to the table. If a calibration is necessary
turn the screw (2) with the provided Allen key in a way
that the saw blade reaches 90° to the table.
• Settheangelindication(3)to0°usingthescrew.
ces soumises à la coupe doivent être bloquées dans
l’étau.
• Eviterdesdémarragesaccidentels:nepaspresserle
bouton-poussoir de marche pendant que vous insérez
la fiche dans la prise de courant.
• Utiliser les outils recommandés dans ce Manuel si
vous voulez que votre tronçonneuse vous assure des
prestations optimales.
• Eloignertoujourslesmainsdelazonedetravailpen-
dant que la machine est en service; avant d’effectuer
une opération de quelque nature que ce soit, relâcher
le bouton sur la poignée pour désactiver la machine.
m Montage
ATTENTION! Dans l’intérêt de votre sécurité, ne pas enficher
la fiche dans une prise de courant avant d’avoir terminé
toutes les étapes du montage et d’avoir lu et compris les
consignes de sécurité et le mode d’emploi.
Retirer la scie de son carton et la placer sur l’établi.
Installation du sac à poussière (Fig. 2)
• Pincerlesemboutsmétalliquesducollierdexation2
du sac à poussière pour emmancher le sac sur l’orifice
d’échappement de la zone du moteur 1.
Réglage de la scie
N. B.:
La scie a été ajustée avec précision en usine avant son
expédition. Pour obtenir les meilleurs résultats, faire les
vérifications suivantes de la précision et ajuster de nou-
veau au besoin.
Réglage des butées d’angle sur 90° (Fig. 3)
• Desserrerlelevierdeblocaged’angleetdéplacer
la tête porte-scie complètement vers la droite. Bloquer
le
levier de blocage d’angle (1).
• Utiliserlerapporteurdelatablepourréglerlalamede
scie sur 90°. Si un ajustement était nécessaire, tourner
la vis (2) avec la clé Allen fournie de telle façon que
la lame de scie soit placée dans un angle de 90° par
rapport à la table.
• Placerl’indicateurd’angle(3)aveclavissur0°.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach MSS 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach MSS 10 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5.96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info