Handleiding Scheppach MS161-46 (pagina 26 van 108) (Duits, Engels, Frans, Pools)

781692

Verklein

Vergroot

Pagina terug

1/108

Pagina verder

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

26 | GB

3. Attach the upper push bar on the lower push bar

with one quick-release lever (5), one washer big

(b), one washer small (c) and one plastic star grip

nut (d) each on both sides (Fig. 4-5). Note the cor-

rect alignment of the quick-release lever xation

slice ensuring the quick-release function remains

intact.

4. Insert the pull start handle (17) in the designated

hook as shown in Fig. 6.

5. Fix the cables to the push bar with the cable clips

(18) provided (Fig. 7).

6. Grass box (16) - open it up and click the plastic

clips into position on the frame (Fig. 8).

7. Mowing with grass box:

Lift the discharge ap (15) with one hand and

hang the grass box (16) as shown in Fig. 9.

8. Mulching:

If the grass box (16) is attached, remove it and

replace it with the mulch insert (19) as shown in

Fig. 10-12.

Setting the cutting height

m CAUTION!

Adjust the cutting height only when the engine is

switched off and the plug boot has been pulled.

• Before you begin to mow, check to ensure that the

blade is not blunt and that none of the fasteners are

damaged.

• To prevent any imbalance, replace blunt and/or

damaged blades as a set only (if applicable). To

carry out this check, rst switch off the engine and

pull the spark plug boot.

• The cutting height is centrally adjusted with the cut-

ting height adjustor lever (Fig.13/ Item 14). 5 differ-

ent cutting heights can be selected.

• Pull the adjustor lever out and select the desired

cutting height. The lever snaps into the desired po-

sition. (Fig. 13)

Preparing the area to be mowed

Before mowing, carefully examine the area. Remove

stones, sticks, bones, wires, toys and other objects

that may be ejected.

8. Operation

m CAUTION!

The engine does not come with oil in it. There-

fore, ensure that you add 0,45 liters of oil before

starting it up. Use normal, multigrade oil (SAE30).

The oil level in the engine must be checked each

time before mowing.

You will also need to ll in petrol, as this is also

not supplied upon delivery.

Reduce noise generation and vibration to a minimum!

• Use only equipment that is in perfect condition.

• Maintain and clean the equipment regularly.

• Adopt your way of working to the equipment.

• Do not overload the equipment.

• Have the equipment checked if necessary.

• Switch off the equipment when not in use.

• Wear gloves.

When using the petrol lawn mower for extended peri-

ods, vibration-induced circulatory problems may oc-

cur (white nger disease).

We cannot give exact details about the duration of

use in this case because it is different for each indi-

vidual.

The following factors can inuence the condition:

• Circulatory problems in the user’s hands

• Low outside temperatures

• Extended periods of use

We therefore recommend you wear warm work gloves

and take regular breaks.

7. Before rst use

Assembling the components

Some parts of the mower come disassembled. For

quick and easy assembly, read and follow the instruc-

tions below.

Important! You will need the following additional tools

(not supplied) for assembly, and also for maintenance

work:

• A 1 liter measuring jug (oil/petrol resistant)

• A petrol can (5 liters is sufcient for approx. 6 op-

erating hours)

• A funnel (suitable for the tankʼs petrol ller neck)

• Household wipes (to wipe up oil/petrol residue; dis-

pose of these at a lling station)

• A petrol suction pump (plastic, available from DIY

stores)

• An oil can with hand pump (available from DIY

stores)

• 0,35 liter of engine oil (SAE 30)

Assembly

1. Take the mower and attachment parts out of the

packaging and check that all parts are present.

2. Attach the lower push bar to both sides of the

mower with one screw (a), 1 washer small (c), 1

plastic star grip nut (d) each. Make sure that the

cables, which will be attached later, are not in the

way (Fig. 2-3).

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Scheppach MS161-46 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info