www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
17 | GB
General instructions
We wish you lots of fun and success whilst working
with your new machine.
Note:
According to the applicable Product Liability Law, the
manufacturer of this machine is not liable for dam-
ages that occur at this machine or on account of this
machine attributable to:
• Improper handling,
• Non-observation of the operating instructions,
• Repairs by unauthorised technicians,
• Installation or replacement of spare parts that are
not original,
• Improper use,
• Failure of electrical system, due to non-observa-
tion of electrical specications and VDE provisions
0100, DIN 57113 / VDE0113.
We recommend the following:
Please read the entire text of the operating instruc-
tions before installation and start-up. These operat-
ing instructions will enable you to get to know your
machine better and to exploit the options for its prop-
er use.
The operating instructions contain important instruc-
tions on how you can work with your machine safely,
professionally and economically, and how you can
avoid risks, save repair costs, reduce downtimes and
increase the reliability and life span of the machine.
In addition to the safety provisions of these operat-
ing instructions, you must also observe without fail,
the applicable specications of your country, for the
operation of the machine.
Keep the operating instructions in a plastic cover near
the machine, protected against dirt and humidity.
The instructions must be read by every member of
the operating staff before starting work and then ob-
served carefully. Only persons who are trained to use
the machine, and instructed about the risks associ-
ated with it, should operate it. The minimum age re-
quirements must be observed.
• After unpacking, check all parts for possible trans-
port damage. In the case of complaints, the distrib-
utor must be contacted immediately. Complaints
will not be entertained later.
• Check to ensure that the delivery is complete.
• Familiarise yourself with the machine before using
it, by referring to the operating instructions.
• For accessories as well as parts and spares,
please use only original parts. Spare parts can be
obtained from your specialist dealer.
• In your orders, please quote our article Nos. as
well as the type and year of manufacture of the ma-
chine.
General safety instructions m
We have marked the positions that affect your
safety in the operation instructions with this
sign: m
WARNING: If you use electrical tools, please
comply with the basic safety-related preventive
measures given below so as to minimize the risk
of re, electric shock and physical injuries.
Please read all the instructions before starting
work with this tool.
• All safety- and risk-related instructions on the ma-
chine must be observed.
• All safety- and risk-related instructions on the ma-
chine must be kept near to the machine in complete
and readable condition.
• The safety devices on the machine are not to be
dismantled or disabled.
• Check the mains power cables. Do not use faulty
connecting cables.
• Check the correct functioning before start-up.
• The operator must be a minimum of 18 years old.
Trainees must be a minimum of 16 years old; how-
ever they may work at the machine only under su-
pervision.
• Persons under the inuence of alcohol, drugs or
medicine are not allowed to use the machine.
• Wear working gloves when working.
• Exercise caution during work: risk of injury from ro-
tating parts
• Maintenance jobs and troubleshooting should be
performed only after switching the motor off. Pull
out the power plug!
• Only electricians should be allowed to perform in-
stallation, repair and servicing jobs on the electrical
installations.
• All protection and safety devices must be reacti-
vated after the repair and servicing jobs have been
completed.
• Switch the motor off when leaving the workplace.
Pull out the power plug!
• Ensure that there is adequate illumination.
