781683
25
Verklein
Vergroot
Pagina terug
1/172
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 25
Air intakes often cover moving parts and should
be kept clear. Loose-tting clothing, jewellery and
long hair may become caught in the moving parts.
6. Technical data
Motor 220 - 240 V ~, 50 Hz
Power 1100 W
Protection class II
Saw band 1140 x 12,7 x 0,65
Saw band speed 0,7 - 2,4 m/s
Cutting width 90° 127 x 127 mm
Cutting width 4 127 x 40 mm
Swivel range 0°-45°
Weight Metal band saw 6,6 kg
Weight 13,6 kg
The total noise values determined in accordance
with EN 60745.
sound pressure level LpA 89 dB(A)
uncertainty KpA 3 dB
sound power level LWA 100 dB(A)
uncertainty KWA 3 dB
Wear hearing protection.
The effects of noise can cause a loss of hearing.
Total vibration values (vector sum - three directions)
determined in accordance with EN 60745.
Vibration Ahv (front handle) = 6,62 m/s2
Vibration Ahv (rear handle) = 6,08 m/s2
Measurement uncertainty KPA = 1,5 m/s2
The specied vibration emission value has been
measured according to a standardised testing pro-
cedure and can be used for comparison of one
electric tool with another;
The specied vibration emission value can also be
used for an initial assessment of the load.
Warning:
The vibration emission value can vary from the
specied value during the actual use of the elec-
tric tool, depending on the type and the manner in
which the electric tool is used;
Try to minimise stress from vibrations as low as
possible. Some examples of means for reducing
the vibration stress are wearing gloves while us-
ing the tool and limiting work time. In doing so, all
parts of the operating cycle must be taken into ac-
count (such as times in which the electric tool is
switched off or times in which it is switched on, but
is not running under a load).
7. Remaining hazards
The machine has been built using modern technolo-
gy in accordance with recognized safety rules. Some
remaining hazards, however, may still exist.
Risk of injury for ngers and hands by the rotating
saw band due to improper handling of the work
piece.
Risk of injury through the hurling work piece due
to improper handling, such as working without the
push stick.
Risk of damaging your health due to wood dust and
wood chips. Wear personal protective cloth such
as goggles. Use a tting dust extractor.
Risk of injury due to defective saw band. Regu-
larely check saw band for such defects.
Risk of injury for ngers and hands while changing
saw band. Wear proper gloves.
Risk of injury due to starting saw band while
switching on the machine.
The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
Wear only close tting clothes. Remove rings,
bracelets and other jewelry.
For the safety of long hair, wear a cap or hair net.
Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
Remaining hazards can be minimized by follow-
ing the instructions in „General safety instructions“
Proper Use“ and in the entire operating manual.
8. Operation
Before commissioning
The saw band must be able to run freely.
In case of previously machined wood, be aware of
any foreign bodies, such as nails or screws, etc.
Before pressing the on/off switch, make sure that
the saw band is correctly tted, and that moving
parts run smoothly.
Before connecting the machine, make certain that
the data on the type plate matches with the mains
power data.
Operating switch (g. 3)
CAUTION:
Before connecting the machine to the mains power
supply, make certain that the on/off switch is work-
ing correctly, and that it returns to the “OFF” position
when released.
To switch on the machine, simply press the on/off
switch (5).
To switch off, release the on/off switch (5).
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach MBS1100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach MBS1100 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Zweeds als bijlage per email.

De handleiding is 9.19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info