782563
43
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 43
2. Turn the hexagon screw (1a) counterclockwise with
the ring spanner 10/13 mm (26) to undo the hexa-
gon screw (1a).
3. Hold the saw blade (1) carefully with one hand
4. Remove the hexagon screw (1a) and outer saw
blade ange (1b) from the drive shaft.
5. Now remove the saw blade (1) from the drive shaft
and carefully draw it up and out of the saw table (5).
15.4.4 Fitting the saw blade (g. 38 + 39)
1. Clean the external and internal saw blade ange
(1c/1b) carefully, before tting a new saw blade (1).
2. Place a new saw blade (1) on the drive shaft. Ob-
serve the rotational direction: The cutting angle
of the teeth must point in the running direction
(forwards). The running direction is usually also
marked on the saw blade.
3. Fit the outer saw blade ange (1b) back on the
drive shaft. Ensure the correct alignment of the
outer saw blade ange (1b).
4. Screw the hexagon screw (1a) tight onto the drive
shaft with the hand.
5. Carefully turn the saw blade (1) in the running
direction: It must be precisely centred and must
not “wobble”. Check that the saw blade (1) and
outer saw blade ange (1b) are seated correctly.
Align the parts once more, if the saw blade is not
precisely centred.
m WARNING
Warning against unexpected hazards and dam-
ages to the product
- Check the setting of the saw blade after every
saw blade replacement.
6. Hold the outer saw blade ange (1d) in position
with the open-ended spanner 10/21 mm (27).
7. Turn the hexagon screw (1a) tight in a clockwise
direction with the open-ended spanner 10/13 mm
(26).
8. Mount the table inlay (4) and the saw blade guard
(2) (see 9.3.3 and 9.4.1).
9. Check the correct setting of the riving knife (see
9.3.2).
15.5 Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*:Carbon brushes, table inlay, push
stick, saw blade
* May not be included in the scope of delivery!
16. Storage
m WARNING
Danger of injury due to unexpected start-up of the
machine
- Remove the mains plug from the socket.
Check the nuts, pins and screws for rm seating.
Check the covers and protective equipment for
damage and correct seating.
Check the electrical connections. Repairs to the
electrical connections may only be carried out by a
specialist workshop.
15.2 Oiling the product
1. Oil the rotating parts once monthly to extend the
life of the tool.
2. Do not oil the motor.
15.3 Servicing carbon brushes
ATTENTION
Product damage
- The carbon brushes must only be replaced by
an electrician.
If excessive sparks are generated, have an electri-
cian check the carbon brushes.
15.4 Replacing the saw blade
m WARNING
Danger of injury! Improper handling of the circular ta-
ble saw may result in serious injury.
m WARNING
Danger of injury due to unexpected start-up of the
machine
- Remove the mains plug from the socket.
m WARNING
Danger of injury for ngers and hands due to sharp
edges
- Wear protective gloves.
15.4.1 Removing the saw blade guard (g. 19)
1. Turn the saw blade (1) to the maximum position
out of the saw table (5) by turning the crank wheel
(16) clockwise until it reaches the stop.
2. Loosen the xing screw (2a).
3. Carefully slide the saw blade guard (2) over the
riving knife (3).
15.4.2 Removing the table inlay (g. 16)
1. Loosen the xing screw (4a).
2. Remove the table inlay (4).
3. Check the table inlay (4) for damage. Replace the
table inlay if it is damaged or no longer connects
ush with the saw table.
15.4.3 Removing the saw blade guard (g. 38 + 39)
PREREQUISITE: The saw blade (1) has been set to
the maximum cutting depth (see 11.2).
1. Place the ring spanner 10/21 mm (27) on the outer
saw blade ange (1b) and secure the drive shaft
in this way.
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach HS116 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach HS116 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 6.03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info