781434
22
Verklein
Vergroot
Pagina terug
1/228
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
22 | GB
The liability of the manufacturer and resulting dam-
ages are excluded in the event of modications of
the machine.
Despite use as intended, specic risk factors cannot
be entirely eliminated. Due to the design and layout
of the machine, the following risks remain:
Contact with the saw blade in the non-covered saw
area.
Reaching into the running saw blade (cutting in-
jury).
Kick-back of workpieces and workpiece parts.
Saw blade breakage.
Ejection of faulty carbide parts of the saw blade.
Hearing damage when the necessary hearing pro-
tection is not used.
Harmful emissions of wood dusts during use in
enclosed areas.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or
for equivalent work.
5. Important information
Attention! The following basic safety measures must
be observed when using electric tools for protection
against electric shock, and the risk of injury andre.
Read all these notices before using the electric tool
and keep the safety instructions for later reference.
Safe work
1 Keep the work area orderly
Disorder in the work area can lead to accidents.
2 Take environmental inuences into account
Do not expose electric tools to rain.
Do not use electric tools in a damp or wet en-
vironment.
Make sure that the work area is well-illuminated.
Do not use electric tools where there is a risk of
re or explosion.
3 Protect yourself from electric shock
Avoid physical contact with earthed parts (e.g.
pipes, radiators, electric ranges, cooling units).
4 Keep other persons away
Do not allow other persons, especially children,
to touch the electric tool or the cable. Keep them
away from your work area.
The operating person must be at least 18 years
of age; trainees must be at least 16 years, how-
ever only under supervision.
5 Securely store unused electric tools
Unused electric tools should be stored in a dry,
elevated or closed location out of the reach of
children.
90°/45° 80 x 60 mm
45°/90° 120 x 35 mm
45°/45° 80 x 35 mm
Motor V/Hz 220-240 / 50
Rated input W S6 25%* 1500W
Technical changes reserved!
* S6, continuous operation periodic duty. Identical
duty cycles with a period at load followed by a pe-
riod at no load. Running time 10 minutes; duty cycle
is 25% of the running time.
The work piece must have a minimum height of
3 mm and a minimum width of 10 mm. Make sure
that the workpiece is always secured with the
clamping device.
Information about noise development
The noise levels of this machine during operation are
as follows:
LpA: 99,6 dB(A) K=3 dB(A)
LwA: 112,6 dB(A) K=3 dB(A)
Wear hearing protection.
The effects of noise can cause a loss of hearing.
Total vibration values (vector sum - three directions)
determined in accordance with EN 61029.
4. Proper use
The mitre saw is used for the cutting of wood and
plastic, according to the machine size.
Warning! The supplied saw blade is only intended
for the sawing of wood! Do not use this blade for the
sawing of plastic!
The saw is not suitable for the cutting of rewood.
The machine may only be used in the intended man-
ner.
Only suitable saw blades may be used for the ma-
chine. The use of any type of cutting wheels is pro-
hibited.
An element of the intended use is also the obser-
vance of the safety instructions, as well as the as-
sembly instructions and operating information in the
operating manual.
Persons who operate and maintain the machine must
be familiar with the manual and must be informed
about potential dangers.
Any use beyond this is improper. The user/operator,
not the manufacturer, is responsible for damages or
injuries of any type resulting from this.
In addition, the applicable accident prevention regu-
lations must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach HM80L bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach HM80L in de taal/talen: Alle talen als bijlage per email.

De handleiding is 11.77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info