781960
25
Verklein
Vergroot
Pagina terug
1/128
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 25
m IMPORTANT!


10. Initial operation
       






The oil level.
Functional check
Checking the oil level (Fig. 15)
         
oil pump and control valve. Check the oil level regu-
-
age the oil pump. The level of oil must be checked
when the riving knife is pulled back. If the oil level is
at the lower notch, then the oil level is at a minimum.
        
added. The upper notch indicates the maximum oil
level. The machine must be on level ground. Screw

E- Motor
Check the running direction of the motor. If the split-
ting arm is not in the top position, bring the splitting
blade in the top position, using the return bracket or
-

levers down. This will move the splitting arm down. If
the splitting blade does not move despite activation of
󰀨
machine. Turn the pole reversing unit in the plug-in
-
tion of the motor.
Never let the motor run in the wrong direction!
This will inevitably destroy the pump system and
no warranty claim can be made.
Functional test

Action: Result:
Push both handles
towards below.
Splitting knife goes down
to approx. 20 cm above
the table.
Let one handle loose,
then the other.
Splitting knife stops in the
desired position.
Press both handles or
return bow upwards
Splitting knife returns to
upper position
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, lm and small parts! There is a risk of
swallowing and su󰀨ocation!
9. Attachment / Before starting the
equipment
9.1 Attaching the wheel axle and the wheels
(enclosed accessories bag a1) (g. 3)
Slide the wheel axle through the holes on the bottom,
rear end of the splitter.
Fit the wheels onto the wheel axle and fasten each of
them with a split pin.
Then attach the wheel caps.
9.2 Putting the splitter into the work position
(Fig. 4, 5 + 6)
Connect the splitter to the mains. Observe the rota-

    



each of the pins with a spring split pin. After that, drive
the splitting blade to the top position and remove the
support.
You must store the support safely because it is
needed every time the splitter is transported.
9.3 Attaching the supporting arm (15) (Fig. 7)

9.4 Attaching the hook (D) (Fig. 8)
Fasten the retainer hook to the frame with two screws

9.5 Attaching the log lifter(Fig. 9)
Fasten the trunk lifter to the retaining lug with the

9.6 Attaching the additional wheel (Fig. 10)
Attach the transport wheel as shown in Fig. 10. Fas-

with the locking pin.
9.7 Moving the transport handle (5) to the trans-
port position (g. 11)

splitter and is fastened in the working position. Loos-


the position of the transport handle. See steps 1 - 3.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach HL1350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach HL1350 in de taal/talen: Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 6.36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info