781470
29
Verklein
Vergroot
Pagina terug
1/176
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 29

-
ter a power failure.
        
check that the voltage marked on the rating plate


󰀨
Persons working on the machine should not be
distracted.
Note the direction of rotation of the motor and
blade.

put them out of operation.
Never cut workpieces which are too small to hold

Never remove loose splinters, chips or jammed
pieces of wood when the saw blade is running.
It is imperative to observe the accident prevention


-
al associations.
Adjustable protective devices have to be adjusted
as close as possible to the workpiece.
Important! Support long workpieces (e.g. with a
roller table) to prevent them sagging at the end
of a cut.
Make sure the blade guard (3) is in its lower posi-
tion when the saw is being transported.
-
use the machine.

must not be used.
If the table insert is worn, replace it.
Never operate the machine if either the door pro-

are open.
Ensure that the choice of blade and the selected
speed are suitable for the material to be cut.
Do not begin cleaning the blade until it has come
to a complete standstill.
For straight cuts of small workpieces against the
longitudinal limit stop the push stick has to be
used.
The bandsaw blade guard should be in its lowest
position close to the bench during transport.
For miter cuts when the table is tilted, the paral-
lel stop must be positioned on the lower part of
the table.
When cutting round timber, use a suitable holding
device to prevent the workpiece turning.
Never use guards to lift or transport items.
Ensure that the bandsaw blade guards are used


bandsaw blade. Use a push stick for narrow cuts.
The push stick has to be stored on the intended de-
vice, so that it can be reached from normal working

In the normal operating position the operator is in
front of the machine.
When sawing wood, connect the band saw to a
dust collection device.
 
use a suitable holding device that prevents the
workpiece from twisting.
6. Technical data
Electro motor 220 - 240 V ~, 50 Hz
Power 550 W (S2 20 min)
Revolutions 1400 min-1
Saw band length 1790 mm
Saw band width 6 mm
Saw band width max. 13 mm
Saw band speed I 660 m/min
Saw band speed II 960 m/min
 0 - 120 mm
Opening width 245 mm
Table size 300 x 300 mm
Slewing range of the table 0° - 45°
size of workpiece max. 580 x 400 x 120 mm
Weight 24 kg
The work piece must have a minimum height of 3 mm
and a minimum width of 10 mm.

Operation at constant load for 20 minutes or less, fol-
󰀩
duration to re-establish machine temperatures within
2 K of the ambient temperature.
The total noise values determined in accordance
with EN 61029.
sound pressure level LpA 77,4 dB(A)
pA 3 dB
sound power level LWA 90,4 dB(A)
WA 3 dB
Wear hearing protection.
 󰀨     
Total vibration values (vector sum - three directions)
determined in accordance with EN 61029.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach HBS261 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach HBS261 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 9.05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info