781636
17
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
17 І 68
o) Do not use the power tool in the vicinity of in-
ammable materials. Sparks may ignite these ma-
terials.
p) Do not use insertion tools which require liquid
coolants. Using water or other liquid coolants may
cause electric shock.
Further safety notes for all applications - kickback
and corresponding safety notes
A kickback is the sudden reaction caused by rotating
insertion tools such as a grinding disk, grinding plate,
wire brush, etc. which has got caught or which blocks.
Getting caught or blocking results in the immedia-
testop of the rotating insertion tool. This accelerates
the uncontrolled power tool against the rotary direction
of the insertion tool.
lf for example a grinding disk gets caught or blocks
in the work piece, the edge of the grinding disk which
penetrates the work piece may get caught, the grin-
ding disk will make a sudden movement or cause a
kickback. As a result, the grinding disk moves towards
the operator or away from the operator, depending on
the rotary direction ofthe disk when it blocks. This may
also cause the fracture of grinding disks.
Kickbacks are the result of the improper or incorrect
use of power tools. Kickbacks can be avoided when
observing the following precautionary measures.
a) Hold the power tool rmly in your hands and
bring your body and arms in a position which al-
lows you to adequately react to kickback forces.
Always use the additional handle, if available.
This ensures you the utmost control of kickback
forces or reaction torques when starting your power
tool. When taking appropriate precautions, the ope-
rator is in the position to control kickback and reac-
tion forces.
b) Keep your hands away from rotating insertion
tools. The insertion tool may move over your hand
in the event of a kickback.
c) Keep your body away from the area where the
power tool may move in the event of a kickback.
Kickbacks always move the power tool in opposite
direction to the movement of the grinding disk at the
spot where it blocks.
d) Corners, sharp edges, etc. must be processed
with special care. Make sure that the insertion tool
does not bounce back from or get trapped on the
work piece. The rotating insertion tool tends to jam
in corners, at sharp edges or when it bounces back.
This may cause the loss of control or a kickback.
e) Do not use chain rings or toothed saw blades.
These insertion tools frequently cause kickbacks or
the loss of control of your power tool.
Additional safety notes regarding grinding with
sandpaper- Special safety notes regarding grin-
ding with sandpaper
a) Do not use oversized abrasive sheets; always
observe the manufacturer‘s specications for
abrasive sheet dimensions. Abrasive sheets pro-
truding the grinding plate may cause injury or result
in the blocking or tearing apart of the abrasive sheet
or in kickbacks.
c) Only use accessory parts especially provided for
this tool and recommended by the manufacturer.
The mere fact that you can mount accessory parts
to your power tool does not ensure safe use.
d) The permissible speed of the insertion tool must
be at least as high as the maximum speed speci-
ed on the power tool. Accessories with a higher
speed may break and y off.
e) The outer diameter and the thickness of the in-
sertion tool must comply with the dimensions
specied on your power tool. lt is not possible to
shield or control insertion tools with different dimen-
sions.
f) Grinding disks, anges, grinding plates or other
accessory parts must exactly mate the grinding
spindie of your power tool. Insertion tools which
do not exactly mate the grinding spindle of your po-
wertool will perform irregular rotations, cause high
vibrations and thus the loss of control.
g) Do not use damaged insertion tools. Prior to
each application, you must check insertion tools
such as grinding disks for chippings and cracks,
grinding plates for cracks, wear or major abra-
sion, wire brushes for loose or broken wires. lf
the power tool or insertion tool falls down, you
must check it for damages, or use an undama-
ged insertion tool. After you have checked and
inserted the insertion tool, both you and persans
in the vicinity must stay out of the Ievel of the
rotating insertion tool, and the tool must be ope-
rated at maximum speed for one minute. Most
of the damaged insertion tools will break within this
test period.
h) Wear personal protective equipment. Depending
on the application of the power tool, you must
wear a full face shield, eye protection or gogg-
les.lf appropriate, you must wear a dust mask,
hearing protection, protective gloves or a special
apron which protects you against small grinding
chips and material particles. Protect your eyes
against foreign objects which y off du ring different
operations. The purpose of dust masks and brea-
thing equipment is to lter the dust generated during
the operation. Long-term exposure to high noise pol-
lution may cause hearing loss.
i) Make sure that other persons stay a safe dis-
tance away from your working area. Persons
accessing your working area must wear personal
protective equipment. Fragments of the work piece
or broken insertion tools may y off and cause injury
even outside the direct working area.
j) Always hold the tool by its insulated handles
when the insertion tool may come into contact
with hidden power lines or with the power cord
of the power tool. Contact with live lines may ener-
gise metaI tool parts and cause electric shock.
k) Keep the power cord away from rotating inser-
tion tools. lf you lose control of the power tool, the
power cord may be cut or trapped, and your hand
or arm may get into the path of the rotating insertion
tool..
l) Never put aside the power tool before the com-
plete halt ofthe insertion tool. Rotating insertion
tools may get in contact with the place of deposit
thus causing the loss of control of the tool.
m)Switch oft the power tool while you carry it
around. Your clothes may be trapped when uninten-
tionally getting in contact with the rotating insertion
tool and the insertion tool may penetrate your body.
n) The ventilationslots of your power tool must be
cleaned on a regular basis. The motor fan sucks in
dust, and the accumulation of metaI dust may cause
electrical risks.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach DS920 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach DS920 in de taal/talen: Nederlands, Duits, Engels, Frans, Fins als bijlage per email.

De handleiding is 2.85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info