781462
28
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
www.scheppach.com
28 | GB
It is imperative to make sure that all devices which
cover the saw blade are in good working order.
Never dismantle the machine’s safety devices or
render them inoperative.
Damaged or faulty safety devices have to be re-
placed immediately.
Never cut workpieces which are too small to hold
securely in your hand.
Never load the machine so much that it cuts out.
Always press the workpiece rmly against the saw
table.
Never remove loose splinters, chips or jammed piec-
es of wood when the saw blade is running.
Switch the machine o󰀨 to rectify faults at the blocked
plug-in tool. - Pull the power plug- Remove the
blockage. Important! Risk of injury from saw blade!
Wear gloves. Carry out a trial run without a work-
piece. Ensure that no unusual noise or vibration oc-
curs. Should this be the case, switch the unit o󰀨 and
contact the manufacturer.
Carry out retooling work, adjustments, measure-
ments and cleaning jobs only when the motor is
switched o󰀨. - Pull the power plug. -
Before switching on, make sure that all keys and
wrenches have been removed from the tool.
Switch o󰀨 the motor and pull the power plug before
you leave the workplace.
Electrical installation work, repairs and maintenance
may only be carried out by persons who have been
specially trained.
Ret all guards and safety devices immediately af-
ter you have completed any repairs or maintenance
work.
Be sure to observe the safety information and op-
erating and maintenance instructions issued by the
manufacturer, as well as the dimensions listed in the
Technical Data.
It is imperative to observe the accident prevention
regulations in force in your area as well as all other
generally recognized rules of safety.
Note the information published by your professional
associations (VBG 7).
The saw is intended to be used indoors only.
Workpieces that are smaller than the saw blade
guard can cause injuries to the hands or ngers.
Use suitable aids!
Avoid cramped hand positions when guiding in the
workpiece and avoid positions in which slipping
could lead to your hand making direct contact with
the saw blade.
-Damaged switches have to be replaced by a
customer service workshop.
-Do not use any electric tool on which the
switch cannot be switched on and o󰀨.
21. ATTENTION
-The use of other insertion tools and other ac-
cessories can entail a danger of injury.
22. Have your electric tool repaired by a quali-
ed electrician
-This electric tool conforms to the applicable
safety regulations. Repairs may only be per-
formed by an electrician using original spare
parts. Otherwise accidents can occur.
WARNING
This electric tool generates an electromagnetic eld
during operation. This eld can impair active or passive
medical implants under certain conditions. In order to
prevent the risk of serious or deadly injuries, we recom-
mend that persons with medical implants consult with
their physician and the manufacturer of the medical im-
plant prior to operating the electric tool.
5.2 Additional safety instructions
Switch the machine o󰀨 immediately and pull the
power plug in an emergency.
Follow all these safety instructions before and while
working with the saw.
Do not use this saw to cut re wood.
Do not use this saw to cross-cut roundwood without
a suitable holding device.
The machine is equipped with a safety switch to
prevent it from being switched on again accidentally
after a power failure.
If you need to use an extension cable, make sure
its conductor cross-section is big enough for the
saw’s power consumption. Minimum cross-section
1,5 mm2.
If you use a cable reel, the complete cable must be
pulled o󰀨 the reel.
Persons working on the machine should not be dis-
tracted.
After you have switched o󰀨 the motor, never slow
down the saw blade by applying pressure to its side.
Only t blades which are well sharpened and have
no cracks or deformations.
Faulty saw blades must be replaced immediately.
Never use saw blades which do not comply with the
data specied in this manual.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach DECO-XLS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach DECO-XLS in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info