782109
19
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
Machine Environmental data
Operation: Altitude <=1000m, Temperature:
5~40Celsius Degree, Humidity: 40Celsius De-
gree <=50%, 20Celsius Degree <=90%
Transportation & storage temperature (Celsius
Degree): -25~+50
Noise emission
Planer
Noise output level in dB (jointing)
LWA idle run = 92.8 dB(A)
LWA processing = 95.1 dB(A)
Noise pressure level at workplace in dB
(jointing)
LqAeq idle run = 75.6 dB(A)
LqAeq processing = 78.5 dB(A)
Noise output level in dB (planing)
LWA idle run = 93.2 dB(A)
LWA processing = 96.6 dB(A)
Sound pressure level at workplace in dB
(planing)
LqAeq idle run = 76.7 dB(A)
LqAeq processing = 79.8 dB(A)
Saw
Noise output level in dB
LWA idle run = 95.4 dB(A)
LWA processing = 99.6 dB(A)
Sound pressure level at workplace in dB
LqAeq idle run = 78.6 dB(A)
LqAeq processing = 83.2 dB(A)
Milling machine
Noise output level in dB
LWA idle run = 93.3 dB(A)
LWA processing = 96.9 dB(A)
Sound pressure level at workplace in dB
LqAeq idle run = 78.5 dB(A)
LqAeq processing = 81.2 dB(A)
Noise characteristic values / measurement
conditions
The specied values are emission values and
need not simultaneously represent safe labour
values. Though there is a correlation between
emission and immission levels,
one cannot derive from this correlation reliably,
whether additional precautionary measures are
necessary. Factors that can inuence the exis-
ting immission level at the current workplace,
contain the duration of the effects, the peculia-
rity of the work room, other noise sources etc.,
e.g., the number of machines and operations in
the vicinity.
The permissible labour values may also vary
from country to country. This information should
however enable the user to make a better as-
sessment of the involved dangers and risks.
For the mentioned emission values, a measure-
ment safety allowance of
K = 4 dB is applicable.
Data on dust emission
The dust emission values measured in ac-
cordance with the “principles of testing dust
machines (concentration parameters) before
wood processing machines” of the Wood Spe-
cialized Committee lie below 2 mg/m3. Hence,
while connecting the machine to a proper and
effective vacuum cleaner with min. 20 m/s air
speed, one can presume a permanently safe
observation of the TRK threshold for wood dust
applicable in the Federal Republic of Germany.
Use hearing- or ear protection.
Use protective masks and goggles.
Use eye protection.
In this operating instructions manual, we
have used the following sign at places that
affect you safety: m
General instuctions
Check all components for possible trans-
port damages after unpacking. In case of
complaints, the person responsible for the
delivery must be contacted. Complaints
made later shall not be entertained.
Check to ensure that the delivery is com-
plete.
Familiarize yourself with the device with the
help of the operating instructions manual
before using it.
Use only original accessories as well as
consumables and spare parts. Spare parts
are available at your Scheppach specia-
lised dealer.
Please quote our Article numbers as well as
type and year of manufacture of the device
in your orders.
NOTE:
According to the applicable Product Liability
Law, the manufacturer of this device shall not be
liable for damages to this device or damages
caused by this device in case of:
Improper handling,
Non-observation of the operating instruc-
tions manual,
Repairs by third parties, unauthorized
tters,
Installation and use of non-original spare
parts,
Improper use of the machine,
Failure of the electrical system due to the
non-observation of the electrical specica-
tions and VDE provisions 0100, DIN 57113
/ VDE0113.
We recommend the following:
Read the entire text of the operating instructions
manual before installation and start-up. This
operating instructions manual is expected to
help you familiarize yourself with the machine
and to use it as per the manufacturers instruc-
tions. The operating instructions manual con-
tains important instructions about how you can
work with the machine safely, economically and
properly, and about how you can avoid risks,
repair costs, reduce downtime and increase the
reliability and life span of the machine.
In addition to the safety provisions of this opera-
ting instructions manual, you must also observe
the specications of your country applicable to
the operation of the machine without fail.
Keep the operating instructions manual in a
plastic cover near the machine to protect it
against pollution and humidity. It must be read
carefully and observed by
all operators before starting work on the machi-
ne. Only persons who are trained to operate the
machine and have been instructed about the
associated risks may work on the machine. The
required minimum age must be observed.
In addition to the safety instructions listed in this
operating instructions manual and the special
regulations of your country, the universally reco-
gnized technical rules must also be observed.
General safety instructions m
Forward the safety instructions to all per-
sons who work on the machine.
Use the machine only if it is in a awless
condition technically, and only after lear-
ning about its proper and safe use, as well
as about the risks involved, complying with
the operating instructions! Get faults that
compromise safety in particular rectied
immediately
Only tools that correspond to the European
Standard EN 847-1 may be used.
All safety- and risk instructions on the
machine
Keep all safety and risk instructions on
the machine in complete and readable
condition.
The circular table saw may not be used to
cut rewood.
Caution during work: Risk of physical injury
to ngers and hands from the rotary cutting
machine.
Please ensure that the machine is stable
and that it is installed on rm ground.
Check the mains power cables. Do not use
any faulty cables.
Keep children away from the machine con-
nected to the power supply.
The age of the operator should be minimum
18 years. Trainees must be minimum 16 ye-
ars old, but they can work on the machine
only under supervision.
The attention of the persons working on the
machine should not be diverted
If a second person is working at the circular
table saw to remove the cut workpieces,
the machine must be equipped with a table
extension. The second person should be
positioned only at the pick-up end of the
table extension.
Keep the operator console of the machine
free of wood shavings and chips.
Wear tight-tting clothes. Remove orna-
ments, rings and wrist-watches.
Observe the direction of rotation of the
motor – see the electrical connection.
The safety devices on the machine are not
to be dismantled or disabled.
Conversion-, adjustment-, measurement-
and cleaning jobs are to be performed only
after the motor is switched off. Disconnect
the power plug and wait for the rotating
tool to stop.
For troubleshooting, switch the machine off
and disconnect the power plug from the
mains socket.
The machine must be connected to a va-
cuum cleaner during all operations. Please
observe the “Proper use according to
manufacturer instructions“ for this.
When working on the machine, all safety
devices and covers must be installed.
Install only well-sharpened, crack-free and
not-deformed saw blades.
Circular saw blades made of high-perfor-
mance fast steel should not be installed.
The safety devices on the machine are not
to be dismantled or disabled.
The splitting wedge is an important safety
device which guides the workpiece and
prevents the closure of the saw kerf behind
the saw blade, and the rebounding of the
19
DGB
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach Bestcombi 310 Kity bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach Bestcombi 310 Kity in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 2.55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info