9
Basato 3 Vario
Band saw
Sawing table
Longitudinal stop
Dust bag connector
Push stick
Accesory Bag
Hexagonal spanner 10 mm / 13 mm
Hexagonal socket head wrench
4 mm / 5 mm
Operating instructions
Passage width 12.05 "
Passage height 8.07 "
Table size 15.75 " x 21.57 "
350 - 750 rpm
92.91 "
Height up to tabletop 20.28 "
Height up to tabletop with
underframe
41.34 "
Overall height without
underframe
45.28 "
Overall height with un-
derframe
66.14 "
Overall width 32.48 "
Overall depth 21.26 "
-8° – +45°
Overall weight without
underframe
152 lbs.
Overall weight with un-
derframe
170 lbs.
Ø 3.94 "
flow rate 149256.05 gal.
stat. under pressure
900 Pa
Drive
Motor 110V /60Hz motor
Nominal consumption
0,80
0,55
Noise parameters
The noise emission values determined according to EN
23746 for the sound level and according to EN 31202
-
-
place are as follows, based on the working conditions listed
Sound level in dB
the mentioned emission values.
Machine description
Due to its perfected design, the machine offers a versatile
application for processing wood and plastics in the work-
shop.
guard and an articulated cover. Upon opening the cover,
possible with the cover closed. The non-cutting part of the
to the sawbelt guide, the latter being protected against
wheel. The non-cutting part of the sawbelt under the table
The swivelling range of the table from -20° to +47° allows
Please consult also the working hints in the operating in-
structions.
Completion
Assembly tools
1 engineer’s wrench 10 mm / 11 mm.
For reasons of packaging technology, the tabletop, the han-
dle, and the handwheel are not mounted.
Installation of the tabletop, Fig. 1
1. Open the case cover, and set the slewing segments to
30°.
2. Loosely screw the tabletop.
Fig. 2
Turn the tabletop into the 0° position, and tighten the
clamping lever.
Fig. 3
Align the tabletop as follows:
1. Put a straight wood border with a length of approximate-
downward parts of the saw band.
2. Put a shifting square against the wood border and the
groove edge of the table. Align the table, and fasten the
two front hexagon head cap screws on the table.
3. Release the clamping lever of the slewing segments by
means of a quarter turn, and pull the back segment out-
wards. Fasten the two back hexagon head cap screws on
the table. Thus, you achieve a smooth slewing capacity.
