782175
23
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
23GB
Make sure the blade guard (3) is in its lower posi-
tion when the saw is being transported.
Safety guards are not to be used to move or mis-
use the machine.
Blades that are misshapen or damaged in any way
must not be used.
If the table insert is worn, replace it.
Never operate the machine if either the door pro-
tecting the blade or the detachable safety device
are open.
Ensure that the choice of blade and the selected
speed are suitable for the material to be cut.
Do not begin cleaning the blade until it has come
to a complete standstill.
For straight cuts of small workpieces against the
longitudinal limit stop the push stick has to be
used.
The bandsaw blade guard should be in its lowest
position close to the bench during transport.
For miter cuts when the table is tilted, the paral-
lel stop must be positioned on the lower part of
the table.
When cutting round timber, use a suitable holding
device to prevent the workpiece turning.
Never use guards to lift or transport items.
Ensure that the bandsaw blade guards are used
and correctly adjusted.
Keep your hands a safety distance away from the
bandsaw blade. Use a push stick for narrow cuts.
The push stick has to be stored on the intended de-
vice, so that it can be reached from normal working
position and is always ready to be used.
In the normal operating position the operator is in
front of the machine.
6. Technical data
Electro motor 220 - 240 V ~, 50 Hz
Power 750W
Revolutions 1400 min-1
Saw band length 2240 mm
Saw band width 12,5 mm
Saw band width max. 15 mm
Cutting speed 720 m/min
Passage height 360 m/min
Passage width 0 - 175 mm
Table size 305 mm
Slewing range of the table 500 x 400 mm
Max. size of the workpiece 0° bis 45°
Overall weight 600 x 600 x 175 mm
Gewicht 74 kg
The work piece must have a minimum height of 3mm
and a minimum width of 10 mm.
The total noise values determined in accordance
with EN 61029.
sound pressure level LpA 77,4 dB(A)
uncertainty KpA 3 dB
sound power level LWA 90,4 dB(A)
uncertainty KWA 3 dB
Wear hearing protection.
The effects of noise can cause a loss of hearing.
Total vibration values (vector sum - three directions)
determined in accordance with EN 61029.
7. Remaining hazards
The machine has been built using modern technolo-
gy in accordance with recognized safety rules. Some
remaining hazards, however, may still exist.
Risk of injury for ngers and hands by the rotating
saw band due to improper handling of the work
piece.
Risk of injury through the hurling work piece due
to improper handling, such as working without the
push stick.
Risk of damaging your health due to wood dust and
wood chips. Wear personal protective cloth such
as goggles. Use a tting dust extractor.
Risk of injury due to defective saw band. Regu-
larely check saw band for such defects.
Risk of injury for ngers and hands while changing
saw band. Wear proper gloves.
Risk of injury due to starting saw band while
switching on the machine.
The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
Wear only closetting clothes. Remove rings,
bracelets and other jewelry.
For the safety of long hair, wear a cap or hair net.
Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
Remaining hazards can be minimized by follow-
ing the instructions in „General safety instructions“
Proper Use“ and in the entire operating manual.
8. Attachment and operation
Before starting the equipment
Make sure the machine stands securely, i.e. bolt it
to a workbench or solid base. There are two holes
for this purpose in the machine foot. • The saw table
must be mounted correctly.
All covers and safety devices have to be properly
tted before the machine is switched on.
It must be possible for the blade to run freely.
When working with wood that has been processed
before, watch out for foreign bodies such as nails
or screws etc.
Before you actuate the On/Off switch, make sure
that the saw blade is correctly tted and that the
machine’s moving parts run smoothly.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach BS3000 Primaster bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach BS3000 Primaster in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 3.93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info