781662
18
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
ses not intended.
8. Dress properly
Do not wear loose clothing or jewellery.
They can be caught in moving parts. Rubber
gloves and non-skid footwear are recom-
mended when working outdoors. Wear
protective hair covering to contain long hair.
9. Use safety glasses
Also use face or dust mask if cutting operati-
on is dusty.
10. Don’t abuse cord
Never carry tool by cord or yank it to disconnect
it from receptacle. Keep cord from heat, oil and
sharp edges.
11. Secure work
Use clamps or a vice to hold work. It’s safer
than using your hand and it frees both hands
to operate tool.
12. Don’t overreach
Keep proper footing and balance at all times.
13. Maintain tools with care
Keep tools sharp and clean for better and
safer performance. Follow instructions for lu-
bricating and changing accessories. Inspect
tool cords periodically and, if damaged,
have repaired by authorized service facility.
Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean
and free from oil and grease.
14. Disconnect tools
When not in use, before servicing, and when
changing accessories.
15. Remove adjusting keys and wrenches
Form the habit of checking to see that keys
and adjusting wrenches are removed from
tool before turning it on.
16. Avoid unintentional starting
Don’t carry plugged-in tool with nger on
switch. Be sure switch is off when plugging
in.
17. Outdoor use extension cords
When tool is used outdoors, use only exten-
sion cords intended for use outdoors and so
marked.
18. Stay alert
Watch what you are doing. Use common
sense. Do not operate tool when you are
tired.
19. Check damaged parts
Before further use of the tool, a guard or
other part that is damaged should be care-
fully checked to determine that it will operate
properly and perform its intended function.
Check for alignment of moving parts, binding
of moving parts, breakage of parts, moun-
ting, and any other conditions that may
affect its operation. A guard or other part that
is damaged should be properly repaired or
replaced by an authorized service-center
unless otherwise indicated elsewhere in
this instructions manual. Have defective
switches replaced by an authorized service-
center. Do not use tool if switch does not
Catapulting parts out of damaged grinding
wheels.
Catapulting of workpieces and parts of workpi-
eces.
Damage to hearing if essential ear-muffs are not
used.
Harmful emissions of wood dust when used in
closed rooms.
The rotating parts of the device cannot be cov-
ered for functional reasons. Therefore you must
exercise care and hold the workpiece rmly to
prevent it slipping which could result in your
hands coming into contact with the grinding/
sanding belt.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not the
manufacturer will be liable for any damage or injuries
of any kind resulting from such misuse.
Please note that our equipment has not been desig-
ned for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.
5. Safety information
m Caution!
Read all safety regulations and instructions. Any
errors made in following the safety regulations and
instructions may result in an electric shock, re and/
or serious injury. Keep all safety regulations and
instructions in a safe place for future use.
m Warning! To protect against electric shock, injury
and re the following basic safety precautions must
be observed when using power tools.
Read and follow these instructions before using the
equipment and keep the safety information in a safe
place.
1. Keep work area clean
Cluttered areas and benches invite injuries.
2. Consider work area environment
Don’t expose power tools to rain. Don’t use
power tools in damp or wet locations. Keep
work area well lit. Don’t use power tools in
presence of ammable liquids or gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces
(e.g. pipes, radiators, ranges refrigerators).
4. Keep children away
Do not allow other persons to touch the
equipment or cable, keep them away from
your work area.
5. Store idle tools
When not is use, tools should be stored in dry,
high, or locked-up place, out of the reach of
children.
6. Don’t force tool
It will do the job better and safer at the rate for
which it was intended.
7. Use right tool
Don’t force small tools or attachments to do the
job of heavy duty tool. Don’t use tools for purpo-
18 / 136
FR CZ SK DK ES FIN IT NL PL PT SE SI NO
GBDE
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach BGS700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach BGS700 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 6.01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info