781467
22
Verklein
Vergroot
Pagina terug
1/124
Pagina verder
22 GB
Set-up
Prepare the workplace where the machine is to be placed.
Insure sufcient room to allow safe work without malfunc-
tions. The machine is designed to operate in closed rooms
and must be placed stabily on rm level ground. Stability
is insured by attachment to the ground with 4 screws (Fig.
14).
Transport
The machine may only be transported with suitable lifting
devices (crane or fork lift). The connection point for the
rope (crane) is on the upper band wheel cabinet.
BASA3 (1901503901) / BASA3 (1901503902)
Scope of delivery Band saw
Sawing table
Longitudinal stop
Dust bag connector
Push stick
Accesory Bag
Hexagonal spanner SW 10/13
Hexagonal socket head wrench
SW 4/SW 5
Operating instructions
Passage width 306 mm
Passage height 205 mm
Table size 400 x 548 mm
Cutting speed 370 – 750 m/min
Saw band length 2360 mm
Height up to tab-
letop
490 mm
Height up to table-
top with
underframe
1025 mm
Overall height with-
out underframe
1125 mm
Overall height with
underframe
1655 mm
Overall width 900 mm
Overall depth 540 mm
Slewing range of the
table
-8° – +45°
Overall weight with-
out underframe
69 kg
Overall weight with
underframe
79 kg
Suction connector Ø 100 mm
Extraction power 565 m3/h
stat. under pressure
(20 m/sec)
900 Pa
Drive
Motor Alternating
current 230-240V
Rotary current
400V 3phase
Nominal consump-
tion P1 (kW)
0,8kW (S1)
1,1 kW (S6 40%)
0,7kW (S1)
1,1kW (S6 40%)
Delivery of power P2
(kW)
0,56 kW (S1)
0,74kW (S6 40%)
0,48 kW (S1)
0,77kW (S6 40%)
Noise parameters
The noise emission values determined accordin
g to EN 23746 for the sound level and according to EN
31202 (coefcient of correction k3 calculated according
to Appendix A.2 of EN 31204) for the sound level at the
workplace are as follows, based on the working conditions
listed in ISO 7904 Appendix A:
Sound level in dB
Idle running LWA = 80.3 dB(A)
Operation LWA = 100.2 dB(A)
Sound level at the workplace in dB
Idle running LpAeq = 64.1 dB(A)
Operation LpAeq = 82.9 dB(A)
A measurement uncertainty allowance K = 4 dB applies to
the mentioned emission values.
Machine description
Due to its perfected design, the machine offers a versatile
application for processing wood and plastics in the work-
shop.
The upper and lower bandwheel is protected by a xed
guard and an articulated cover. Upon opening the cover,
the machine is switched off. Switching on again is only
possible with the cover closed. The non-cutting part of the
sawbelt above the table top is covered by a guard xed
to the sawbelt guide, the latter being protected against
inadvertant opening by the xed guard of the upper band
wheel. The non-cutting part of the sawbelt under the table
top is protected by a xed cover.
The swivelling range of the table from -20° to +47° allows
versatile cutting possibilities (e.g.)
• Longitudinal cuts
• Cross cuts
• Diagonal cuts
• Curved and irregular cuts
• Cuts for dovetails and tenons
• On-edge cuts of squared beams
Please consult also the working hints in the operating in-
structions.
Completion
Assembly tools
1 engineer’s wrench SW 10/13
For reasons of packaging technology, the tabletop, the
handle, and the handwheel are not mounted.
Installation of the Underframe, Fig. 1.1
1. Put a wooden block behind the machine, and than
carefully turn over the machine so that the base plate
lies on the oor.
2. Loosely screw the frame feet with 12 screws (M6 x 12)
to the base plate.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach BASA3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach BASA3 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 5.67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info