781452
19
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 19
m IMPORTANT!
The device is not suitable for vacuuming ammable
liquids. For wet vacuuming, use the only the foam l-
ter (22) provided.
Drain hose (11) (g. 20)
The stainless steel container (15) is equipped with
a water drain hose (11) in order to make it easier to
drain. To do so, pull the stopper (7) out of the drain
hose (11) and drain off the liquid. Then insert the stop-
per (7) again.
9. Maintenance and cleaning
m WARNING!
Prior to any adjustment, maintenance or service
work disconnect the mains power plug!
Cleaning
It is recommended to clean the device after each use.
Do not spray the device with water or clean it under
running water. This can result in electric shocks and
can damage the device.
Empty the stainless steel container (15) after each
use: After opening the stopper in the drain hose (7),
the liquid collected can be drained out. Residual liq-
uid remains in the stainless steel container (15). To
remove residual liquid, take off the machine head (2)
by releasing the locking hooks (5) from the stainless
steel container (15). Pour out the liquid residue. Clean
the container with a damp cloth.
Replace paper lter bag when full
Always keep the device clean. Do not use cleaning
agents or solvents.
Keep the ventilation slots clean and free of dirt and
dust.
Clean the device only with a soft brush or a damp
cloth.
Clean the foam lter (22) with a little soap and run-
ning water and then leave it to air dry.
Maintenance
The device is maintenance-free.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables. Wear parts*: Foam lter, Paper lter
bag, Folded lter for dry vacuuming
* Not necessarily included in the scope of delivery!
Blowing:
Connect the suction hose (21) to the blowing func-
tion connection port (19). Slide the end of the suction
hose (21) with the two nipples into the blowing func-
tion connection port (19). Insert the two nipples into
the recesses. It is not necessary to turn it here.
Installing the metal extension tube (27), suction
hose (21) and nozzles (25/26) (g. 16, 17)
Connect the metal extension tube (27) with the
bent end of the suction hose (21).
Fit the oor nozzle (25) or joint nozzle (26) to the
other end of the metal extension tube (27).
Push the slide piece forwards (A) to change the
length of the metal extension tube (27). (Fig. 17)
Pull the tube to the desired length (B). Ensure that
the slide lock latches into place. (Fig. 17)
8. Operation
m WARNING!
Switch the device off if liquid or foam emerges with
the exhaust air during wet vacuuming.
Switch on / switch off / automatic (g. 18, 19)
The ON/OFF switch (18) has three settings:
1 switch setting 0: Off
2 switch setting II: On
Press the on/off switch (18) to switch on.
Press the on/off switch (18) again to switch the de-
vice off.
3 switch setting I: Automatic mode (the vacuum
cleaner will be switched on by an electric tool).
Plug your electrical tool’s cable into the automatic
socket (g. 19).
Connect the suction hose to the suction connection
on your electrical tool.
Check that the connection is secure and airtight.
Set the switch on the vacuum system to position “I
= Automatic mode.
Dry vacuuming (g. 3, 12, 13)
Use the folded lter (24) for dry vacuuming. The pa-
per lter bag (23) can be used in addition. This en-
sures that the folded lter (24) remains free of dust for
longer and maintains the vacuum power for longer.
In addition, the disposal of the dust is also easier.
Always ensure that the lters are correctly tted.
Wet vacuuming (g. 3, 11)
Use the foam lter (22) for wet vacuuming. Ensure
that the foam lter (22) is correctly tted.
If the stainless steel container (15) is full, the safety
oat valve (20) closes the suction port and suction
operation is interrupted.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach ASP50-ES bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach ASP50-ES in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools, Fins als bijlage per email.

De handleiding is 4.58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info