782136
17
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
17 / 32
Even when all safety measures are taken, some re-
maining hazards which are not yet evident may still
be present.
Remaining hazards can be minimized by following
the instructions in “Safety Precautions”, “Proper
Use“ and in the entire operating manual.
Keep this safety information in a safe place.
6. Technical data
Technical Data
Dimensions L x W x H
(mm): 830 x 520 x 1600
Overall height with
lter bag mm
1600
Ectractor duct
connections ø mm 100
Hose length mm 2200
Wheel diameter mm 150
Approx. weight kg 20
Rate of air ow m3/h 1150
Pressure differential
Pa 1600
Filter aera (lter bag)
m2 approx. 1
Sawdust bag capacity
litres 75
Performance
Electric motor 230 V/5O Hz
Nominal input P1 0,55 kW
Output power P2 0,34 kW
Motorspeed 1/min. 2850
Work Place Emissions Values:
Empty Run Noise dB
(A) 75,5
Working Noise dB (A) 75,5
7. Assembly
For packaging reasons your machine is delivered in
semi-assembled state.
Attach the side covering loosely to the base frame
using at-head screws M8 x 40 mm and screw nuts.
Do not tighten completely. Fig. 2, 3
Attach the cross-member to the side covering left
and right with at-head screws M 8 x 12 and screw
nuts. Fig. 4, 5
Remove all screws and nuts form the housing.
Attach the housing to the side coverings using at-
head screws M5 x 20 and screw nuts. Securely
tighten all nuts. Fig. 6
Slide the clamp through the tabs on the lter bag
and x the lter bag on the container. Fig. 7
Position the support bar into the housing and hang
the lter bag from it. Fig. 1
Attach the shavings bag to the lower air ventilator
using the clamp. Fig. 7
It is imperative to observe the accident prevention
regulations in force in your area as well as all other
generally recognized rules of safety.
Note the information published by your professio-
nal associations.
Do not use any low-powered machines for heavy
duty work.
Do not mis-use the cable
Make sure you stand squarely and keep your ba-
lance at all times.
Check that the moving parts are in good working
order, that they do not jam, and that no parts are
damaged. Make sure that all parts are tted cor-
rectly and that all other operating conditions are
properly fullled.
Unless otherwise stated in the operating instruc-
tions, damaged safety devices and parts have to
be repaired or replaced by an authorized service
center.
Have damaged switches replaced by a customer
service workshop.
This electric tool complies with the pertinent safety
regulations. Repairs are to be carried out only by
a qualied electrician using original replacement
parts or the user may suffer an accident.
If necessary, wear suitable personal protection
equipment. This could consist of:
- Ear-muffs to prevent the risk of damaging your
hearing
- A breathing mask to prevent the risk of inhaling
hazardous dust
The operator has to be informed about the condi-
tions with an inuence on noise development.
Faults on the machine have to be reported to the
person in charge as soon as they are discovered.
This appliance is not suitable for the collection of
dangerous dust.
This equipment is not designed to be used by peop-
le (including children) with limited physical, sensory
or mental capacities or those with no experience
and/or knowledge unless they are supervised by a
person who is responsible for their safety or they
have received instructions from such a person in
how to use the equipment safely. Children must al-
ways be supervised in order to ensure that they do
not play with the equipment.
Remaining hazards
The machine has been built using modem techno-
logy in accordance with recognized safety rules.
Some remaining hazards, however, may still exist.
Wood chips and sawdust can be health hazards.
Be sure to wear personal protective gear such as
safety goggles and a dust mask.
Dust inhalation may occur when closing and replac-
ing the dust bag.
Please note the instructions concerning proper dis-
posal in the operating manual (e.g. the use of P2
dust masks) to prevent dust inhalation.
Noise can be a health hazard. The permitted noise
level is exceeded when working. Be sure to wear
personal protective gear such as ear protection.
The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
GB
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach ASP120 Kity bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach ASP120 Kity in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 2.54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info