Before each use, make sure that the power cord is not damaged. A device with a
damaged mains cable should be taken out of operation immediately and sent
back to the customer service for maintenance.
Never use a power supply that does not match with the information on the bottom
of the device (label). Always unplug the device after use.
Never block the air inlets on the side of the device. They serve the ventilation and
cooling of the motor.
Do not exceed the maximum capacity of the nebuliser (8 ml / 8 cm³ ).
Micro-bacterial contamination: : As 100% disinfection in domestic use is often
not possible, it is strongly recommended that each
user have their own personal accessories and use only these. A corresponding re-
order card is included with each device.
4
Via medicinal products certified and classified as a Medical product of the class IIa.
The inhaler SC 145 complies with the EU safety standards EN 60601-1:1990 +
A1:1993 + A2:1995 + A13:1996, EN 60601-1-2:1993, EN 60601-1-2:2001 and
ergonomic standards, required of a medical electrical appliance. Furthermore, the
EU-Standard EN 13544-1:2007 ( Respiratory therapy equipment - part 1:
Nebuliser systems and their components) is met.
The manufacturer's quality assurance system is certified according to EN ISO
9001:2000 and ISO 13485:2003.
Symbols used:
Never use the appliance in the bath or shower!
Device type B, see user manual!
Class II equipment, No latex
Switch off, Indicates that the device meets all
relevant standards
Switch on,
Alternating current
13
Technical Data:
Voltage: 230 V / 50 Hz
Power consumption: 130 VA
Fuse: T 2.5 A - 250 V
Max. operating pressure (idle): approx. 150 kPa
Operating pressure with nebuliser: About 65 kPa
Air outlet: approx. 9 l/min.
Noise level (in 1 m): approx. 57 dB (A)
Operating conditions: 10 °C to 40 °C, 10% to 95% RH
Storage conditions: -25 °C to 70 °C, 10% to 95% RH
