50953
4
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Manual SA 250
pag. 2
Technical specifications
PCG/C SA 250 Manual 27-03-07
Start up
Carefully unpack the scale.
Check the presence of:
- weigh platform with digital indicator
- stainless steel pole with locking bolts and bolt spanner
- mains adaptor in carton box
- English user manual
Fix indicator upon the pole and the pole into the foot (lockup bolts)
Put the scale in level position with the level indicator and the
4 leveling feet
Connect the platform cable to the indicator, connect mains adapter
and press the “ON” switch (with an empty weigh platform!)
The scale automatically sets zero and is ready for use now
The built in battery allows the scale to work for maximum 75 hours
without connection to mains supply.
Due to differences in temperature it may last until 10 minutes after switching on before the reading of the weight is
completely accurate.
Place the articles to be weighed carefully on the weigh platform. Prevent for bumping against and overloading of
the weighing platform. The loadcell down under it may be damaged seriously.
Check, if necessary, the accuracy with an accurate calibration weight. Using the calibration procedure (page 13) the
scale may be re-adjusted. Stamped scales are sealed to prevent for illegal adjustments
At first start up the built in battery may be not completely loaded. Re-load the battery by leaving the scale in OFF
position for at least 16 hours with a connected mains adaptor.
Weighing capacities : Capacity and division are user settable via the software.
Legal trade version has 3000 divisions, the High Resolution (HR) version
has up to 15000 scale divisions.
Accuracy : Fulfils the European Weight and Measures regulations (EN 45501) for new
weighing scales:
at a load of: 0 - 500 divisions : deviation <
½ scale division
500 - 2000 divisions : deviation <
1 scale division
2000 - 3000 divisions : deviation <
1½ scale division
The HR version has a deviation of max. 2 divisions.
Environmental : in operation: 0° … + 40°C, in stock: -10° … + 55°C, max. 85% RH.
Construction : Stainless steel platform, ABS housing of indicator, coated aluminum (34 SA)
or steel (46/66 SA) weigh frames, stainless steel pole with cast aluminum foot
Excitation : Mains adaptor 230 VAC 50 Hz 60 mA, output 9 VDC 500 mA,
built in rechargeable battery and charger.
Operation on battery : 75 / 28 hours, without / with display back light switched on.
Battery charging time : At least 20 hours for a complete charge.
Automatic switch off : Settable: auto off after 5, 10, 20, 30 minutes standstill, or no auto off active.
Display back light : Settable: on, off, or automatic on during weighing (display > 0,0 kg).
RS 232 data communication : 2400 / 9600 Bd (settable), 8 data bits, 1 stop bit, no parity,
CR and LF, fixed string 13 bytes, decimal dot and a kg sign included,
9-pole male D-connector, 4 transmission modes.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel +31 36 522 20 30
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax +31 36 522 20 60
3892 DA ZEEWOLDE The Netherlands
RS connecto
r
Mains adaptor and
p
latform cable connecto
r
Level indicator
Pole foot
Indicator
Pole
Weigh platform
Turnable
console
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satex . . SA 250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satex . . SA 250 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satex . . SA 250

Satex . . SA 250 Gebruiksaanwijzing - Nederlands - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info