629722
33
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
SATEL VERSA IP 31
If the SERVICE MESSAGE AFTER TAMPER ALARM option is enabled in the control panel,
only the installer can clear the tamper alarm memory.
6.20 Output control
Using the keypad, you can control the operation of devices connected to the outputs (e.g. to
raise/lower roller blinds/shutters, turn on/off lighting or heating, etc.). The installer defines
how the outputs should work (whether the output will be activated for a defined time, or it will
remain active until deactivated by the user, timer, etc.).
6.20.1 Quick control of outputs
The installer can assign outputs to the numeric keys and allow them to be quickly controlled
(without entering the code).
Quick activation of output
Press the key to which the controllable output is assigned, and then
.
Quick deactivation of output
Press the key to which the controllable output is assigned, and then
.
6.20.2 Controlling the outputs by means of proximity card VERSA-LCDR /
VERSA-LCDM-WRL
The status of outputs can be toggled by using the proximity card, provided that the keypad
has been configured by the installer so as to make this function available. In order to toggle
the output status, bring the card close to the keys and hold it there for about 3 seconds.
6.20.3 Controlling the outputs by means of function
Enter the user menu and press in turn . The output number is shown in the upper
line of the display, and the output name in the lower line. You can scroll through the list of
outputs by using the and
keys. Information on the output state is shown in the
upper right corner of the display:
– output is activated,
– output is deactivated.
Press to activate the output, or to deactivate the output.
If you want to see the status of all outputs you can control, press
or . The
numbers around the display enable identification of the outputs. Use the
and
keys to move the cursor. Having hovered your cursor over the output, you can activate it by
pressing or deactivate it by pressing . If you want to restore the previous way of
presentation of the output list, press or .
6.21 Tests
6.21.1 Zone test
The function enables checking the system zones and detectors connected to them for proper
functioning.
You can test the zones for which the installer has programmed other wiring type than
NOT USED.
Zone violation during the test will not trigger the control panel reaction, as
preprogrammed for the zone.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Satel-Versa-IP

Zoeken resetten

  • Gele LED knippert, gebruikersmenu info systeemstatus (7#) zegt: batterijspanning is laag. Maar systeem (Versa IP) is aangesloten op electriciteitsnet, heeft geen batterij. Ik weet niet hoe ik van dat geknipper af moet komen. Gesteld op 30-7-2022 om 17:52

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Versa IP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Versa IP in de taal/talen: Engels als bijlage per email.

De handleiding is 0,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel Versa IP

Satel Versa IP Snelstart handleiding - Nederlands - 2 pagina's

Satel Versa IP Gebruiksaanwijzing - Nederlands - 45 pagina's

Satel Versa IP Snelstart handleiding - Nederlands - 12 pagina's

Satel Versa IP Aanvulling / aanpassing - Nederlands - 93 pagina's

Satel Versa IP Gebruiksaanwijzing - Nederlands - 45 pagina's

Satel Versa IP Snelstart handleiding - Deutsch - 11 pagina's

Satel Versa IP Aanvulling / aanpassing - Deutsch - 97 pagina's

Satel Versa IP Gebruiksaanwijzing - Deutsch - 45 pagina's

Satel Versa IP Installatiehandleiding - Deutsch - 38 pagina's

Satel Versa IP Snelstart handleiding - English - 11 pagina's

Satel Versa IP Gebruiksaanwijzing - English - 32 pagina's

Satel Versa IP Installatiehandleiding - English - 36 pagina's

Satel Versa IP Aanvulling / aanpassing - English - 93 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info