629722
10
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
8 VERSA IP SATEL
When you are using the user menu or service menu, the
LED is:
blinking rapidly during navigation through the menus and submenus,
steady on after a function is started.
6.1.2 Display
The display provides a number of data, facilitating communication between the alarm system
and the user. The installer defines how the display will be backlit and selects the information
to be shown on the display screen.
The display can work in normal mode or in zone presentation mode (the modes being
toggled by means of the key). When in the normal mode, the date and time (in installer
defined format) or the keypad name are presented in the upper line of the display. In the
zone presentation mode, symbols are displayed, showing the status of zones available in the
system (where the control panel settings do not provide for detector presence at a zone, the
status of the zone is not displayed). The numbers around the display correspond to the zone
numbers. The symbols illustrate the following zone states (the higher position on the list, the
higher priority of the presented state):
– inhibited (not displayed when armed),
[blinking] – isolated (not displayed when armed),
– long violated (not displayed when armed),
– no violations (not displayed when armed),
– first triggered alarm,
– tampered (2EOL type zone),
– violated,
– tamper memory (2EOL type zone),
– alarm memory,
– normal state.
If the global GRADE 2 option is enabled by the installer, switching the display over to
the zone status presentation mode ( key) is impossible.
Irrespective of the selected mode, the occurrence of specific events may result in the
following information being displayed (the higher position = the higher priority of the status
presented):
countdown of auto-arming delay,
countdown of entry delay,
countdown of exit delay,
alarm from zone – the message contains the name of zone which triggered the alarm and
remains displayed until the alarm is cleared (in case of alarm from several zones,
messages about successive alarms are displayed alternately every 2 seconds – use the
or key to scroll them through),
alarm in partition – the message contains the name of partition where the alarm occurred
and remains displayed until the alarm is cleared (if there is alarm in both partitions,
messages about the alarm are displayed alternately every 2 seconds in the first and
second partition – use the or key to scroll them through),
there was a tamper and the service must be called in – the message is displayed until
trouble memory is cleared by a person using the service code (see: “Trouble memory and
clearing the trouble memory” p. 30).
10

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Satel-Versa-IP

Zoeken resetten

  • Gele LED knippert, gebruikersmenu info systeemstatus (7#) zegt: batterijspanning is laag. Maar systeem (Versa IP) is aangesloten op electriciteitsnet, heeft geen batterij. Ik weet niet hoe ik van dat geknipper af moet komen. Gesteld op 30-7-2022 om 17:52

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Versa IP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Versa IP in de taal/talen: Engels als bijlage per email.

De handleiding is 0,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel Versa IP

Satel Versa IP Snelstart handleiding - Nederlands - 2 pagina's

Satel Versa IP Gebruiksaanwijzing - Nederlands - 45 pagina's

Satel Versa IP Snelstart handleiding - Nederlands - 12 pagina's

Satel Versa IP Aanvulling / aanpassing - Nederlands - 93 pagina's

Satel Versa IP Gebruiksaanwijzing - Nederlands - 45 pagina's

Satel Versa IP Snelstart handleiding - Deutsch - 11 pagina's

Satel Versa IP Aanvulling / aanpassing - Deutsch - 97 pagina's

Satel Versa IP Gebruiksaanwijzing - Deutsch - 45 pagina's

Satel Versa IP Installatiehandleiding - Deutsch - 38 pagina's

Satel Versa IP Snelstart handleiding - English - 11 pagina's

Satel Versa IP Gebruiksaanwijzing - English - 32 pagina's

Satel Versa IP Installatiehandleiding - English - 36 pagina's

Satel Versa IP Aanvulling / aanpassing - English - 93 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info