699460
21
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
SATEL VERSA 19
13. Arming: Partition 1 LED is ON when partition 1 is armed
14. Arming: Partition 2 LED is ON when partition 2 is armed
15. Arming: Partition 1 or 2 LED is ON when partition 1 or 2 is armed
16. Arming: Partition 1 and 2 LED is ON when partitions 1 and 2 are armed
17. Partition 1 – Full arm LED is ON when partition 1 is armed in full mode
18. Partition 1 – Night arm LED is ON when partition 1 is armed in night mode
19. Partition 1 – Day arm LED is ON when partition 1 is armed in day mode
20. Partition 2 – Full arm LED is ON when partition 2 is armed in full mode
21. Partition 2 – Night arm LED is ON when partition 2 is armed in night mode
22. Partition 2 – Day arm LED is ON when partition 2 is armed in day mode
23. Partition 1 – Alarm LED is ON when there is alarm in partition 1
24. Partition 2 – Alarm LED is ON when there is alarm in partition 2
25. Partition 1 or 2 – Alarm LED is ON when there is alarm in partition 1 or 2
26. Trouble LED is ON when there is trouble in the system
27. Partition 1 – Not armed LED is ON when partition 1 is disarmed
28. Partition 2 – Not armed LED is ON when partition 2 is disarmed
29. Partition 1+2 – Not armed LED is ON when partitions 1 and 2 are disarmed
255. NOT PRESENT LED will not be used for confirmation
Contact the installer to obtain information on the zone types and output functions.
24. Step 6j. Selecting confirmation for LED 2 in APT-100 keyfob. Proceed in the same
way as in Step 6i.
25. Step 6k. Selecting confirmation for LED 3 in APT-100 keyfob. Proceed in the same
way as in Step 6i.
Pressing the key between Step 6a and 6k will cancel the keyfob adding, but will
not terminate the user adding procedure.
26. Step 7. Adding proximity card. If a device provided with proximity card reader is
installed in the system, a proximity card can be assigned to the user. Press in turn
and
(if a proximity card is to be assigned to the user) or only (if no proximity
card is to be assigned to the user).
27. Step 7a. Selecting card addition method. Press
(if the card code is to be
entered) or select the device, by means of which the card code will be read. The LEDs
corresponding to the addresses of devices are steady on, and the and keys
allow you to select the device (the LED corresponding to the selected module will start
blinking). Having selected the device, press .
28. Step 7b. Adding proximity card. Depending on the selected method:
enter the card code (see: “Entering hexadecimal characters” p. 11) and press ,
bring the card twice close to the reader (displayed messages will prompt you what to
do). Remember that the card number will only be sent by the proximity card
arm/disarm device after the card is moved away from the reader.
Pressing the key in Step 7a or 7b will cancel the card adding.
3.9.2 User editing
1. Enter the user menu and press in turn . User editing is effected by the
“step by step” method, hence the programming step number is presented on the and
LEDs of the first and second partitions (see: page 11, Table 1).
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel VERSA 5

Satel VERSA 5 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 5 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 5 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 5 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 5 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 5 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 5 Snelstart handleiding - Deutsch - 11 pagina's

Satel VERSA 5 Aanvulling / aanpassing - Deutsch - 89 pagina's

Satel VERSA 5 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 5 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 5 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 5 Snelstart handleiding - English - 11 pagina's

Satel VERSA 5 Aanvulling / aanpassing - English - 87 pagina's

Satel VERSA 5 Installatiehandleiding - English - 36 pagina's

Satel VERSA 5 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info