699458
39
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
SATEL VERSA 37
In case of the VIBRATION zone wiring, opening the circuit for 200 ms or longer –
irrespective of the programmed number of pulses and sensitivity (see below) – will be
interpreted as violation. This solution enables a magnetic contact to be connected in
series with the vibration detector.
Sensitivity – depending on selected wiring type:
NO, NC, EOL and 2EOL – the time during which the zone must be violated, so that it
can be noted by the control panel. The sensitivity is programmed in milliseconds.
Values from the 20 ms to 5100 ms range can be entered.
Vibration – the pulse whose duration is equal to or longer than the defined time will
cause violation of the zone. Values from the 3 ms to 96 ms range can be programmed
(every 3 ms).
Pulse validity – the time counted from the pulse occurrence during which subsequent pulses
must occur (their number being defined as the PULSE COUNT) so that the zone is violated.
The following values can be programmed: 30 s, 120 s, 240 s and 0. If no further pulses will
occur within the defined time period, the pulse counter will be reset. The pulse counter is
reset automatically at arming/disarming. If the value 0 is programmed, the counter will only
be reset at arming/disarming. This parameter is programmed for the ROLLER zone wiring.
Pulse count – the number of pulses after which the zone will be violated. This parameter is
programmed for the ROLLER and VIBRATION zone wiring. For the VIBRATION zone wiring, it is
possible to program values from 0 to 7 (for the value 0, the pulses will not be counted, the
SENSITIVITY parameter only being taken into account). For the ROLLER zone wiring, you can
program values from 1 to 8.
In the DLOADX program, all the required parameters for zones in ROLLER and
VIBRATION configuration are programmed in the “Sensitivity” field.
Max. violation time – if the zone is violated for the preset time (e.g. because the detector is
damaged or masked), a trouble will be reported. Up to 255 seconds can be programmed.
Programming the value 0 means that the control panel will not check whether the zone is
violated too long.
Max. no violation time – if zone is not violated for the preset time (e.g. because of
damaging or masking the detector), a trouble will be reported. When the zone is armed,
the countdown is not running. You can program up to 255 hours. Programming the value
0 means that the control panel will not check whether the zone is violated or not.
6.4 Zone types
0. ENTRY/EXIT – a delayed zone combining two functions:
entry – violation of the zone starts entry delay counting in the partition and turns on delay
for the 2. E
NTRY/EXIT ROUTE type zone.
exit – violation of the zone during exit delay countdown is equivalent to the partition exit.
1. ENTRY/EXIT FINAL – the same as the 0. ENTRY/EXIT type, but if the arming procedure has
started and the control panel registers the zone restore, the exit delay countdown will be
terminated.
2. ENTRY/EXIT ROUTE – during the countdown of ENTRY DELAY or DELAY ACTIVATION TIME the
zone acts as a delayed one (alarm will be triggered after expiry of the DELAY TIME). In other
situations it acts as an instant zone.
3. INSTANT – instant zone, which is already armed during exit delay countdown.
4. DOUBLE KNOCK – the zone triggers the burglary alarm only after the second violation. The first
violation of the zone only results in the “Zone violation” event being logged (the event to may
reported in format 4/2). The second violation must take place during the WAITING TIME
countdown.
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 15 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 15 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel VERSA 15

Satel VERSA 15 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 15 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 15 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 15 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 15 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 15 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 15 Aanvulling / aanpassing - Deutsch - 11 pagina's

Satel VERSA 15 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 15 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 15 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 15 Snelstart handleiding - English - 11 pagina's

Satel VERSA 15 Installatiehandleiding - English - 36 pagina's

Satel VERSA 15 Gebruiksaanwijzing - English - 32 pagina's

Satel VERSA 15 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info