699458
30
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
28 VERSA SATEL
– in case of arming by means of the LCD keypad, the control panel will check if there are
any zones bypassed in the partition – information on the bypassed zones is presented,
if the user has the INSPECTION right,
the warning alarm feature is enabled in the system (see: WARNING ALARM global option),
the warning alarm is signaled at the 2. INTERNAL SIREN function output (ref. WARNING
ALARM ON INTERNAL SIRENS
global option).
You can enable/disable the option in keypad: SERVICE MODE 2. HARDWARE 1. KPDS &
EXPS
. 4. OPTIONS GRADE2.
Serial data on OUT 3/4 – if the option is enabled, OUT3 and OUT4 outputs send the system
status data (zone alarms, fire alarms, troubles, armed modes, etc.) and do not execute any
other programmed functions. The outputs may be used to control the NR2-DSC radio
monitoring transmitter (NEMROD system – PC-16 OUT format), made by NOKTON.
OUT 3/4 data extended mode – if the option is enabled, the OUT3 and OUT4 outputs will
send the system status data in the form of frames (PC-16 OUT UA format). The option is
available, if the SERIAL DATA ON OUT 3/4 option is enabled.
Arm./Disarm./Clear. signaling from zones only – if the option is enabled, outputs with the
functions 1. EXTERNAL SIREN and 2. INTERNAL SIREN with enabled ARM/DISARM/CLEAR SIGN.
option will signal only:
starting of the arming procedure by zone or by means of keyfob,
– no possibility of arming (see: PREVENT ARMING IF NOT READY option or GRADE 2 option), if
the arming command has been sent from keyfob,
failed attempt of arming by means of keypad or keyfob (see: PREVENT ARMING IF NOT
READY
option or GRADE 2 option),
disarming by zone or by means of keyfob,
alarm clearing by zone or by means of keyfob.
Starting the arming procedure, disarming or alarm clearing by means of keypad, proximity
card arm/disarm device or timer are not signaled.
Clear messaging on alarm clearing – if the option is enabled, clearing the alarm will
automatically cancel messaging about this alarm, if the user clearing the alarm has the
T
EL. MESS. CLEARING right.
Service message after tamper alarm – if the option is enabled, information on the tamper
alarm can only be cleared from the troubles memory by using the service code. In the LCD
keypad, the “System tamper, call service” message will be displayed after the tamper
alarm (unless the alarm messages are displayed). The message will no longer be
displayed after the troubles memory is reset by the service.
Warning alarm – if the option is enabled, the warning alarm feature is enabled. It purpose is
to delay the loud signaling and reporting, if any mistakes are made when entering the
protected facility. The warning alarm is not reported. It can be signaled on the keypad,
proximity card arm/disarm device or outputs with the function 2. I
NTERNAL SIREN. The
warning alarm is triggered by the following zone types:
– 0. ENTRY/EXIT or 1. ENTRY/EXIT FINAL – unless the system is disarmed before completion
of the ENTRY DELAY countdown,
– 2. ENTRY/EXIT ROUTE – if it is violated during the ENTRY DELAY countdown, and the
system is not disarmed before completion of the D
ELAY TIME countdown,
– 3. I
NSTANT – if it is violated during the ENTRY DELAY countdown.
The warning alarm lasts 30 seconds. Unless the alarm system is disarmed during this
time, the alarm will be triggered by the zone.
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 15 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 15 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel VERSA 15

Satel VERSA 15 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 15 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 15 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 15 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 15 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 15 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 15 Aanvulling / aanpassing - Deutsch - 11 pagina's

Satel VERSA 15 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 15 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 15 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 15 Snelstart handleiding - English - 11 pagina's

Satel VERSA 15 Installatiehandleiding - English - 36 pagina's

Satel VERSA 15 Gebruiksaanwijzing - English - 32 pagina's

Satel VERSA 15 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info