699458
25
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
SATEL VERSA 23
4. Establish communication between the control panel and the program in one of the
following ways.
Establishing communication with verification of identifiers
Use the keypad to start the local programming function [START DWNLRS]:
1. Enter the service code and press .
2. Press in turn .
Establishing communication without verification of identifiers
If no communication identifiers have been programmed in the DLOADX program, use the
keypad to enter the service mode:
1. Enter the service code and press .
2. Press in turn . The service mode will be started and, additionally, the
local programming function will be started [START DWNLRS].
Emergency communication establishing procedure (“from pins”)
If the control panel does not support keypads, does not accept the service code, etc., start
the service mode “from pins” (see: “Starting the service mode “from pins”” p. 5). The local
programming function [START DWNLRS] will be started automatically.
3.3.2 Finishing local programming
You can finish the local programming function from the keypad by using the FINISHDWNLRS
function (enter the service code and press , and then press in turn ).
The local programming function will be finished automatically 4 hours after communication
with the DLOADX program is ended.
3.4 Remote programming
3.4.1 Programming via modem
Modem communication can be established in one of the following ways:
1. Connection initialized from the DLOADX program. The control panel can be programmed
from any location.
2. Connection initialized from the DLOADX program, but the control panel calls back and
sets up the connection. The control panel can only be programmed from a defined
location.
3. Connection initialized by the control panel. The control panel can only be programmed
from a defined location. This method should be used when the system user does not want
the remote programming to take place without his knowledge.
Initiating a modem connection from DLOADX program
Control panel settings:
do not program the telephone number of modem connected to computer!
enable ANSWERING MODEM option (see: “Global options” p. 27),
define the number of rings after which the control panel will answer incoming calls – RINGS
BEFORE ANSWER
(see: “Other global parameters” p. 31),
enable the DOUBLE CALL option if the control panel is to answer only after the second call
(see: “Global options” p. 27).
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 15 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 15 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel VERSA 15

Satel VERSA 15 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 15 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 15 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 15 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 15 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 15 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 15 Aanvulling / aanpassing - Deutsch - 11 pagina's

Satel VERSA 15 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 15 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 15 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 15 Snelstart handleiding - English - 11 pagina's

Satel VERSA 15 Installatiehandleiding - English - 36 pagina's

Satel VERSA 15 Gebruiksaanwijzing - English - 32 pagina's

Satel VERSA 15 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info