699459
73
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
SATEL VERSA 71
SIA – id. conf. required – if the option is enabled, the control panel will wait for
acknowledgement by the monitoring station of receiving the identifier with which the data
were sent. The option applies to telephone reporting.
Longer waiting for initial handshake – if the option is enabled, the control panel will wait
longer for handshake from the monitoring station in case of sending events in the Ademco
Express, Contact ID or SIA format. Enable this option in the event of telephone reporting, if
the monitoring station sends a non-standard initial handshake.
Long kiss-off signal – if the option is enabled, the control panel will accept a long kiss-off
(acknowledgment) signal for receiving events in case of Ademco Express and Contact ID
formats. Enable this option in the event of telephone reporting, if the monitoring station
acknowledges receiving events in a non-standard way (the kiss-off signal is longer than
800 ms).
10.2.3 Test transmissions
The test transmission may be sent:
at a specified time. The test transmission code will be sent regularly at a defined time. The
number of days between transmissions and the time of sending transmission are
programmed. Programming the value 0 for days means that the transmission will be sent
everyday (in the same way, as in case programming the value 1).
in specified time intervals. You can program the time intervals in which test transmissions
are to be sent when the system is disarmed and when the system is armed (number of
days, hours and minutes). The test transmission code will be sent:
– after a predefined period of time has elapsed since the last transmission, irrespective of
whether it was a test transmission, or the code of another event was sent (the NO SYNC.
TO LAST TRANSMISSION
option disabled),
at predefined time intervals (the NO SYNC. TO LAST TRANSMISSION option enabled).
10.3 SIA-IP
10.3.1 Monitoring station 1 / Monitoring station 2
IP format – if the event codes are to be sent via Ethernet, specify whether SATEL format or
SIA-IP format (SIA DC-09 standard) will be used.
Protocol – if the event codes are to be sent via Ethernet, specify whether TCP or UDP
protocol will be used.
Options – options related to SIA-IP format:
Send MAC address – if this option is enabled, the MAC address is sent with event code.
Send timestamp – if this option is enabled, the date and time are sent with event code
(the monitoring station can change the date and time in the control panel).
Encrypt data – if the option is enabled, the data being sent are encrypted, and the date
and time are sent with event code (the monitoring station can change the date and time
in the control panel).
SIA-IP key – the key to encrypt data to be sent using the SIA-IP format.
hex – if the option is enabled, you can enter up to 32 hexadecimal characters as the
SIA-IP
KEY
. If the option is disabled, you can enter up to 16 alphanumeric characters as the
SIA-IP KEY.
SIA-IP acct – a string of up to 16 hexadecimal characters, which is used to identify the
control panel for the purpose of reporting in SIA-IP format.
Supervision interval – in the case of reporting in the SIA-IP format, an additional
transmission can be sent at specified intervals to check communication with the monitoring
73

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 10 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel VERSA 10

Satel VERSA 10 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 10 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Deutsch - 89 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 10 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 10 Snelstart handleiding - English - 11 pagina's

Satel VERSA 10 Installatiehandleiding - English - 36 pagina's

Satel VERSA 10 Gebruiksaanwijzing - English - 32 pagina's

Satel VERSA 10 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info