699459
70
Verklein
Vergroot
Pagina terug
1/87
Pagina verder
68 VERSA SATEL
9.2 Timer parameters
Name – individual timer name (up to 16 characters).
Weekly schedule – the time of starting/ending timer for each day of the week and everyday
(the timer can be started/ended twice a day: according to the settings scheduled for the
given day of the week and according to the everyday settings).
Exception – the period during which the timer will be started/ended at a different time than
indicated in the weekly schedule. 4 exceptions can be programmed for a timer. You can
program for each exception:
the date from which the exception will apply,
the date to which the exception will apply,
the timer start/end time when an exception applies.
Partition arming mode – the arming mode that will be activated in the partition when the
timer will start.
10. Reporting
The control panel can send event codes to the monitoring station by using the following
transmission paths:
analog telephone line [built-in analog telephone communicator],
Ethernet network [requires the ETHM-1 / ETHM-1 Plus module to be connected].
If both transmission paths are used, the control panel will first try to send the event code
through the Ethernet network, and only when the attempt fails, it will switch over to the
telephone reporting.
10.1 Configuring the reporting
You can configure the reporting parameters and options:
DLOADX program: “VERSA – Reporting” window.
functions available in the M
ONITORING submenu (SERVICE MODE 5. MONITORING).
All parameters and options of reporting can only be configured by means of the
DLOADX program.
10.2 Reporting parameters and options
REPORTING TELEPHONE and REPORTING ETHM options are described in the “Global
options” section (p. 27).
10.2.1 Options
Station 1 or 2 – select this option if the control panel is to send event codes to Station 1, and
in the case of failure – to Station 2.
Station 1 – select this option if the control panel is to send event codes to Station 1 only.
Station 2 – select this option if the control panel is to send event codes to Station 2 only.
Station 1 and 2 – select this option if the control panel is to send event codes to both
monitoring stations.
Events amount limiting – if the option is enabled, events from the same source are saved
into the event log and reported to the monitoring station 3 times only. This option does not
apply to the alarms from zones (see: A
UTO-RESET 3 or AUTO-RESET 1 zone option).
70

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 10 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel VERSA 10

Satel VERSA 10 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 10 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Deutsch - 89 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 10 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 10 Snelstart handleiding - English - 11 pagina's

Satel VERSA 10 Installatiehandleiding - English - 36 pagina's

Satel VERSA 10 Gebruiksaanwijzing - English - 32 pagina's

Satel VERSA 10 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info