699459
11
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
SATEL VERSA 9
there is a trouble which did not exist when the arming procedure was started.
3.3 Disarming and alarm clearing
Disarming and alarm clearing are carried out in the same way, the procedures being
interconnected. If the partition is armed and an alarm is triggered in it, then disarming will
also mean alarm clearing.
In order to clear the alarm without disarming the partition, arm again the partition in the
same mode (see: “Arming” p. 7).
3.3.1 Disarming and alarm clearing without partition selection
Enter the code and then press . Disarming / alarm clearing will take place in the
partitions to which you have access.
3.3.2 Disarming and alarm clearing in selected partition
1. Indicate partition which is to be disarmed and/or where alarm is to be cleared (press one
of the keys:
- partition 1; - partition 2).
2. Press
. Backlight of the keys will start blinking, which indicates that the code must
be entered.
3. Enter the code.
4. Press or .
3.3.3 Viewing the zones which triggered alarm
Having cleared the alarm, you can check which zones triggered the alarm (this does not
apply to the TMP zone of the control panel). The information will be available until viewing the
zones or arming the system.
Enter the code, and then press in turn . Information on the zones which
triggered alarm is presented on the LEDs designated by numbers. The blinking LED means
that the zone with number corresponding to that of the LED triggered alarm.
3.4 Quick inspection of partition status
If such an option is provided by the installer, pressing and holding down the key for
about 3 seconds will display information on the partition state (whether it is armed and what
type of arming mode is set). At the same time, the LED will come on. Information on the
partition status is provided by means of LEDs 1-3 (partition 1 status) and LEDs 16-18
(partition 2 status):
none of the LEDs is ON – partition is disarmed,
LED 1 is ON – full armed mode in partition 1,
LED 2 is ON – night armed mode in partition 1,
LED 3 is ON – day armed mode in partition 1,
LED 16 is ON – full armed mode in partition 2,
LED 17 is ON – night armed mode in partition 2,
LED 18 is ON – day armed mode in partition 2.
To terminate the function of partition state presentation, press . The keypad will quit the
function automatically after 2 minutes.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel VERSA 10

Satel VERSA 10 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 10 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Deutsch - 89 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 10 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 10 Snelstart handleiding - English - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - English - 87 pagina's

Satel VERSA 10 Installatiehandleiding - English - 36 pagina's

Satel VERSA 10 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info