699537
35
Verklein
Vergroot
Pagina terug
1/47
Pagina verder
SATEL PERFECTA LTE 33
8.2 Direct connection to PERFECTA SOFT
PERFECTA Soft address [041.Address] – address of the computer running the PERFECTA
S
OFT
program. It must be a public address. You can enter the IP address or domain name.
Port [042.Port] – number of the TCP port used for direct communication between the control
panel and the computer with PERFECTA
S
OFT
program (data transmission via cellular
network). You can enter values from 0 to 65535 (0=disabled).
SMS initiating connection [115.PERF.Soft] – control command which will be sent in SMS
message to initiate communication between the control panel and the PERFECTA
S
OFT
program. You can enter up to 8 alphanumeric characters (digits, letters and special
characters). You can enter spaces, but at least one character must be different from the
space.
The command content must be different from that of the other control commands
preprogrammed in the control panel.
In the SMS message, you can include address of the computer the control panel is to
connect to, and the number of TCP port which is to be used for communication.
9. Reporting
The control panel can send event codes to the monitoring station by using the following
transmission paths:
GPRS/LTE (data transmission via cellular network),
SMS messages (control panel gets no acknowledgement of event code receipt),
GSM voice channel (the use of this transmission path is not recommended because of
distortions that may occur when sending the event codes).
9.1 Reporting parameters and options
Reporting [Monitoring] – if the option is enabled, the control panel can send event codes to
the monitoring station.
Reporting mode [72.Stations] – defines how event codes are to be sent to the monitoring
stations:
Station 1 or station 2 – the control panel will make an attempt to send the event code to
station 1 and, if unsuccessful, to station 2.
Station 1 only – the event codes are only sent to station 1.
Station 2 only – the event codes are only sent to station 2.
Station 1 and Station 2 – the event codes are sent to both stations.
9.1.1 Station 1 / Station 2
Reporting format [738.Format / 758.Format] – format in which event codes are sent to the
monitoring station:
CID – all codes – event codes are sent in Contact ID format. All events are sent to the
monitoring station.
CID – selected codes – event codes are sent in Contact ID format. Only selected events
are sent to the monitoring station.
SIA – all codes – event codes are sent in SIA format. All events are sent to the monitoring
station.
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel PERFECTA 32 LTE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel PERFECTA 32 LTE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel PERFECTA 32 LTE

Satel PERFECTA 32 LTE Gebruiksaanwijzing - Deutsch - 11 pagina's

Satel PERFECTA 32 LTE Aanvulling / aanpassing - Deutsch - 50 pagina's

Satel PERFECTA 32 LTE Installatiehandleiding - Deutsch - 27 pagina's

Satel PERFECTA 32 LTE Snelstart handleiding - English - 10 pagina's

Satel PERFECTA 32 LTE Gebruiksaanwijzing - English - 30 pagina's

Satel PERFECTA 32 LTE Aanvulling / aanpassing - English - 50 pagina's

Satel PERFECTA 32 LTE Installatiehandleiding - English - 26 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info