699464
23
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
SATEL PERFECTA 21
Quick activation of output
Press the key to which the controllable output is assigned, and then .
Quick deactivation of output
Press the key to which the controllable output is assigned, and then .
6.15.2 Controlling the outputs by means of function
1. Enter the user menu and press to run 8.O
UTPUTS CTRL
. function.
2. Symbols illustrating the status of outputs you can control will be presented in the upper
line of the display:
– output is deactivated,
– output is activated.
The numbers above the display make identification of the outputs possible. If no symbol is
displayed below the number, you cannot control the output.
3. Use the or key to hover the cursor over the output you want to control. The
name of the output will be presented in the lower line of the display.
4. Press to activate the output or to deactivate the output.
6.16 Tests
6.16.1 Zone test
The 1.Z
ONES TEST
function allows you to test the system zones and detectors.
You can test the zones for which the installer has programmed other wiring type than
N
O DETECTOR
.
Zone violation during the test will not trigger the control panel reaction, as
preprogrammed for the zone.
When testing the zones, the keypad does not present the current zone state, but only
indicates whether or not the zone was violated during the test.
1. Enter the user menu and press in turn to run 1.Z
ONES TEST
function.
2. Define the test duration (from 1 to 99 minutes).
3. Press to start test.
4. The zones that you can test will be presented on the display by the symbol
. The
numbers around the display enable identification of the zones.
5. Violate the zone (e.g. walking through the area supervised by the motion detector or
opening the window supervised by the magnetic contact).
6. The keypad should inform you that the zone has been violated (the zone symbol changes
to ). Information on the violation will be presented until the zone test is terminated.
7. The test will be terminated automatically after the defined time has elapsed. You can
terminate it earlier by pressing .
6.16.2 Output test
The 2.O
UTPUTS TEST
function makes it possible to test the system outputs and sirens or other
devices connected to the outputs.
1. Enter the user menu and press in turn to run 2.O
UTPUTS TEST
function.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel PERFECTA 16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel PERFECTA 16 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel PERFECTA 16

Satel PERFECTA 16 Snelstart handleiding - Nederlands - 11 pagina's

Satel PERFECTA 16 Gebruiksaanwijzing - Nederlands - 32 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - Nederlands - 52 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - Nederlands - 50 pagina's

Satel PERFECTA 16 Installatiehandleiding - Nederlands - 28 pagina's

Satel PERFECTA 16 Gebruiksaanwijzing - Deutsch - 32 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - Deutsch - 52 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - Deutsch - 50 pagina's

Satel PERFECTA 16 Installatiehandleiding - Deutsch - 28 pagina's

Satel PERFECTA 16 Snelstart handleiding - English - 10 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - English - 49 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - English - 50 pagina's

Satel PERFECTA 16 Installatiehandleiding - English - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info