699548
43
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
SATEL MICRA 41
5. When the SIA-IP format is selected:
define the account number to be used to identify the control panel for the reporting
purposes (“SIA-IP account no.” field);
define the time interval at which an additional test transmission is to be sent (“Test
transm. every” field).
6. Indicate the monitoring station to which the event code is to be sent (the event may be
sent to both stations) and define the Contact ID codes for events to be reported. It should
be done in the “Reporting” tab, the “Keyfobs” tab (“Reporting” tab) and in the “MKP-300
keypad” tab, “Messaging / reporting” table. In the alarm module mode, with the “Set CID
codes automatically” option enabled, the codes are assigned automatically.
4.7 STARTING SMS REPORTING
1. Enter the telephone number of Short Message Service Center in “SMS center number”
field in the “GSM telephone, Monitoring stations” tab”, unless it has been saved by the
operator to the SIM card memory.
2. Configure parameters of the monitoring station(s) (“GSM telephone, Monitoring stations”
tab):
select the “SMS” field;
enter the GSM telephone number through which the monitoring station receives SMS
messages (“Tel. number (SMS)” field).
3. Define the SMS message format in which the received event codes will be sent to the
monitoring station (“GSM telephone, Monitoring stations” tab).
4. Indicate the monitoring station to which the event code is to be sent (the event may be
sent to both monitoring stations) and define the Contact ID codes or two-character codes
for events to be reported. It should be done in the “Reporting” tab and the “Keyfobs” tab
(“Reporting” tab) and in the “MKP-300 keypad” tab, “Messaging / reporting” table. In the
alarm module mode, with the “Set CID codes automatically” option enabled, the codes are
assigned automatically.
4.8 STARTING CLIP / SMS MESSAGING
The SMS or CLIP messaging is conducted irrespective of the monitoring.
1. Enter the telephone number of Short Message Service Center in “SMS center number”
field in the “GSM telephone, Monitoring stations” tab”, unless it has been saved by the
operator to the SIM card memory.
2. Enter the telephone numbers which are to be notified by the module, using the SMS
messages or CLIP service (“Telephone numbers for messaging and test transmissions”
table in the “GSM telephone, Monitoring stations” tab).
3. Define about which events and in what form (CLIP or SMS) the predefined telephone
numbers are to be notified. In case of SMS messaging, it is necessary to define the
content of SMS message. It should be done in the “CLIP / SMS messaging” tab and the
“Keyfobs” tab (“CLIP / SMS messaging” tab) and in the “MKP-300 keypad” tab,
“Messaging / reporting” table. For events related to the analog zones, you can additionally
enable the “Add input voltage value to message” option.
4.9 CHANGING THE TEXT MESSAGES BY USING SMS
The content of SMS message defined:
in the “Violation / pass” and “Restore” fields, “CLIP/SMS messaging” tab,
in the “SMS” field, “Keyfobs” tab,
in the “SMS” field, “MKP-300 keypad” tab,
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel MICRA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel MICRA in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel MICRA

Satel MICRA Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel MICRA Gebruiksaanwijzing - Deutsch - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info