699548
24
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
22 MICRA SATEL
Output 1 / 2
Control of the outputs by means of commands sent in SMS messages is possible in the
communication device mode and, for the C
ONTROLLED
type outputs, in the alarm device
mode.
Turn on – content of the control command which will be used to activate the relay output.
Turn off – content of the control command which will be used to deactivate the relay
output.
Turn on for period – content of the control command which will be used to activate the
relay output for a period of time (the cut-off time must be defined for the output).
Zones
Bypass – content of the control command that must be included in the SMS message
being sent to the module for the zones to be bypassed (blocked). Depending on the
module operating mode:
communications device – all zones with the “Blocked” option enabled will be blocked.
alarm device – the zones specified in the received SMS message will be bypassed.
The SMS message should have the following form: xxxx=n= (where “xxxx” is the
command, defined in the “Bypass” field, starting the zone bypassing function in the
module; “n” is the number of zone to be bypassed – where two or more zones are to
be bypassed, they must be separated by commas and then the command should
have, for example, the following form: bypass=1,2,3= ). The zone will remain
bypassed until it is unbypassed by using the control command received in the SMS
message.
Unbypass – content of the control command that must be included in the SMS message
being sent to the module for the zones to be unbypassed (unblocked). Depending on
the module operating mode:
communications device – all blocked zones will be unblocked.
alarm device – zones specified in the received SMS message will be unbypassed. The
SMS message should have the following form: yyyy=n= (where “yyyy” is the
command, defined in the "Unbypass" field, starting the zone unbypassing function in
the module; “n” is the number of zone to be unbypassed – where two or more zones
are to be unbypassed, they must be separated by commas and then the command
should have, for example, the following form: unbypass=1,2,3= ).
The armed zones cannot be bypassed / unbypassed (alarm device mode).
Options
The module can be c
ontrolled by using SMS messages. The control commands should be
defined in consecutive tabs. The SMS message to be sent to the module may only contain
one control command. The control command can be composed of up to 24 characters.
SMS control only from list of telephone numbers for messaging – if the option is
enabled, only the SMS messages sent from authorized telephone numbers will allow:
control (arming/disarming, alarm clearing, bypassing/unbypassing zones,
activating/deactivating outputs),
changing the content of text messages used for SMS notifications.
The telephone numbers must be included in the “Telephone numbers for messaging
and test transmissions” list.
Confirm controlling with status SMS – if this option is enabled, starting the control
function (arming/disarming, alarm clearing, bypassing/unbypassing zones,
activating/deactivating outputs) will result in sending by the module of an SMS message
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel MICRA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel MICRA in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel MICRA

Satel MICRA Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel MICRA Gebruiksaanwijzing - Deutsch - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info