699075
43
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
SATEL INTEGRA 41
3. When the and LEDs start blinking alternately, enter the new code and confirm it
with the
key.
7. Using the entry keypad
The INT-SCR multifunction keypad can work in the entry keypad mode (INT-ENT). The main
task of the zone keypad is activation of the delay for the 3. INTERIOR DELAYED type zones. The
time period during which these zones will act as delayed ones is programmable for the
keypad. If more than one zone keypads are assigned to the partition, a different delay
unblocking time can be programmed for each of them. After expiry of the programmed time,
the interior delayed zones will again operate as instant ones.
7.1 LED indicators
Only the LED
is used. Blinking of the LED indicates that the delay activation time
countdown is running (disarming has no effect on the LED blinking).
7.2 Sound signaling
The installer can disable the sound signaling or replace it by blinking of keypad
backlight.
During operation, the keypad can generate the following sounds:
1 short beep pressing any digit key, confirmation that code has been entered or card has
been read.
3 short beepsconfirmation of delay activation.
4 short and 1 long beeps confirmation of the guard round or execution of the control for
24. MONO SWITCH or 25. BI SWITCH type outputs.
3 pairs of short beepsthe user should change his/her code.
2 long beeps unknown code/card.
3 long beeps activation the delay is impossible (the partition is disarmed or the delay has
already been started) or the function is unavailable.
Additionally, the keypad can audibly signal the DELAY ACTIVATION TIME.
7.3 Functions available from the entry keypad
Depending on the user type and authority level, keypad settings and alarm system status,
entering the code and confirming it with the or key (presenting the proximity card) will
result in:
activating the delay in partition for 3. INTERIOR DELAYED type zones,
changing over the status of 25. BI SWITCH type outputs,
turning on the 24. MONO SWITCH type outputs,
guard round confirmation.
8. Using the code lock
The basic task of the code lock is to execute the access control function (supervise a single
door).
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 64 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 64 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel Integra 64

Satel Integra 64 Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel Integra 64 Snelstart handleiding - Nederlands - 24 pagina's

Satel Integra 64 Aanvulling / aanpassing - Nederlands - 121 pagina's

Satel Integra 64 Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 64 Aanvulling / aanpassing - Deutsch - 121 pagina's

Satel Integra 64 Gebruiksaanwijzing - Deutsch - 54 pagina's

Satel Integra 64 Installatiehandleiding - Deutsch - 38 pagina's

Satel Integra 64 Snelstart handleiding - Deutsch - 2 pagina's

Satel Integra 64 Aanvulling / aanpassing - English - 114 pagina's

Satel Integra 64 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info