699075
99
Verklein
Vergroot
Pagina terug
1/114
Pagina verder
SATEL INTEGRA 97
ETHM/GPRS
Server [IP address] the address of STAM-2 monitoring station (or SMET-256 converter). It
can be entered in the form of IP address (4 decimal numbers separated by dots) or as a
name.
Port the number of port through which communication with the monitoring station will be
effected.
Station key [Key (MS)] the key with which the data sent to the monitoring station will be
encrypted (a string of up to 12 alphanumeric characters). The parameter applies to the IP
SATEL format.
IP format [SIA-IP] if the event codes are to be sent via Ethernet or GPRS, specify whether
SATEL format or SIA-IP format (SIA DC-09 standard) will be used.
Protocol [UDP] if the event codes are to be sent via Ethernet or GPRS, specify whether
TCP or UDP protocol will be used.
ETHM key [Key (ETHM)] the string of up to 5 alphanumeric characters intended to identify
the control panel for the purposes of reporting via Ethernet. The parameter applies to the
IP SATEL format.
GPRS key [Key (GPRS)] the string of up to 5 alphanumeric characters intended to identify
the control panel for the purposes of reporting using the GPRS technology. The parameter
applies to the IP SATEL format.
It is recommended that the maximum number of characters be programmed for the
keys and that letters, digits and special characters be used, as this will ensure higher
security of the transmission.
Identifiers
Each event code is sent to the monitoring station with an identifier. Up to 8 identifiers plus a
system identifier can be programmed. Sent with the system identifier are events related to
the alarm system (troubles, tests, etc.).
4 characters (digits or letters from A to F) must be programmed for each identifier. Using the
digit 0 in the identifier is not recommended.
For the pulse, ADEMCO EXPRESS, CONTACT ID (SELECTED) or SIA (SELECTED) formats, you must
define which events will be sent with the given identifier (see: Identifiers assignment).
For the CONTACT ID (FULL) or SIA (FULL) formats, each object has its own identifier.
Therefore, the identifiers of non-existing objects need not to be programmed. In the
system event identifier field, you should re-enter the identifier of the object which is
responsible for the system (for example, the object, where the control panel is
installed).
SIA / TELIM prefix
2 characters which will precede each of the identifiers in case of the SIA and TELIM formats.
Thus an identifier consisting of 6 characters can be obtained. 2 hexadecimal characters
(digits or letters from A to F) can be programmed. Entering 00 means that the prefix will not
be added. Using the digit 0 in the prefix is not recommended.
Events assignment
If the events are to be sent to both stations (STATION 1 AND 2 is selected), you can define
which event types will be reported to the given station.
It is not possible to assign events for the CONTACT ID (FULL) and SIA (FULL) formats.
99

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 64 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 64 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel Integra 64

Satel Integra 64 Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel Integra 64 Snelstart handleiding - Nederlands - 24 pagina's

Satel Integra 64 Aanvulling / aanpassing - Nederlands - 121 pagina's

Satel Integra 64 Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 64 Aanvulling / aanpassing - Deutsch - 121 pagina's

Satel Integra 64 Gebruiksaanwijzing - Deutsch - 54 pagina's

Satel Integra 64 Installatiehandleiding - Deutsch - 38 pagina's

Satel Integra 64 Snelstart handleiding - Deutsch - 2 pagina's

Satel Integra 64 Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 64 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info