699075
78
Verklein
Vergroot
Pagina terug
1/114
Pagina verder
76 Programming SATEL
Disable downloading [Block DWNL] with this option enabled, starting communication with
the DLOADX program from pinswill be impossible.
Hide service mode after [Hide SM after] the time counted from the last operation
performed in the service menu, after expiry of which the service mode menu will be hidden
(see: p. 6). If value 0 is programmed, the automatic hiding of the service mode will be
disabled.
Service mode beep [SM sounds] with this option enabled, the service mode will be
acoustically signaled in the keypad.
User code min. length [Min. code length] the minimum required number of digits in the
user code. The parameter will be taken into account when creating and editing the codes
(but it has no effect on the codes already existing in the system).
6.7 Other parameters
Prefix lengththe required number of digits in the prefix. Entering a number different from 0
means that from now each code will have to be preceded by a prefix:
normal for everyday use. By default, it consists of a suitable number of digits 0 (e.g. if
the prefix length has been set at 4, the default prefix will be: 0000),
DURESS to be used, when the user is forced to enter the code. If used, a silent alarm
will be triggered. By default, it consists of a suitable number of digits 4 (e.g. if the prefix
length has been set at 3, the default prefix will be: 444).
The prefixes and their validity can be programmed by the administrator (master), using the
CHANGE PREFIX function.
Each change of the prefix length restores the prefix factory values.
The service code need not be preceded by a suitable prefix it is enough when the
number of digits preceding the code matches the prefix length.
PING test the ETHM-1 (firmware version 1.05 or newer) / ETHM-1 Plus modules can test
communications by using the PING command sent to the indicated network device. The
ETHM-1 / ETHM-1 Plus module will be testing communication after the parameters
described below are configured and the PING TEST option is enabled in the module itself.
In the DLOADX program, you can program the PING test parameters in the Structure
window, Hardwaretab, after you click on the keypad bus.
Address to test [PING] address of the device to which the module is to send the PING
command to test communications. It can be entered as an IP address (4 decimal
numbers separated by dots) or as a name.
Period [PING period] the interval between consecutive communication tests by using the
PING command. If value 0 is programmed, the communication test will be disabled.
Tries no. before trouble [PING tries] the number of unsuccessful communication tests
(the module has received no answer to the PING command sent) after which trouble will
be reported. If value 0 is programmed, the communication test will be disabled.
Integration encryption key [Integrate key] if the ETHM-1 / ETHM-1 Plus module is used
for integration of the control panel with other systems and the communication over
Ethernet network is to be encrypted, enter the key with which the data will be encrypted:
up to 12 alphanumeric characters. In the DLOADX program, the encryption key can be
programmed in the Structurewindow, Hardwaretab, after clicking on the keypad bus.
6.8 Default user's authority level
You can define which user rights will be automatically assigned to a new user. The list of
permissions can be modified during user creating or editing.
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 64 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 64 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel Integra 64

Satel Integra 64 Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel Integra 64 Snelstart handleiding - Nederlands - 24 pagina's

Satel Integra 64 Aanvulling / aanpassing - Nederlands - 121 pagina's

Satel Integra 64 Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 64 Aanvulling / aanpassing - Deutsch - 121 pagina's

Satel Integra 64 Gebruiksaanwijzing - Deutsch - 54 pagina's

Satel Integra 64 Installatiehandleiding - Deutsch - 38 pagina's

Satel Integra 64 Snelstart handleiding - Deutsch - 2 pagina's

Satel Integra 64 Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 64 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info