699075
66
Verklein
Vergroot
Pagina terug
1/114
Pagina verder
64 Programming SATEL
as the output cut-off time) and if another violation occurs after the power is turned on
again, the fire alarm will be triggered. The output can be reset by the user.
45. PARTITION BLOCK STATUS indicates a temporary blocking of the partition armed status. If
the output cut-off time is different from 0, the output will signal that the partition blocking is
ending (the output will turn on for a programmed time before the blocking ends).
46. OUTPUTS LOGICAL AND active when all the control outputs with normal polarity are
active and all the control outputs with reversed polarity are inactive (because of the POL.+
option, the output can be used for logical negation). See: Logical functions of outputs
p. 68.
47. OUTPUTS LOGICAL OR active when any control output with normal polarity is active or
any control output with reversed polarity is inactive (because of the POL.+ option, the
output can be used for logical negation). See:Logical functions of outputs” p. 68.
48...63 VOICE MESSAGE 1–16 activated by the telephone messaging function. It enables any
external device to be used for playback of notification messages. When programming the
telephone messaging, the number of message to be played back is to be programmed.
The messaging will turn on the corresponding output.
64...79 REMOTE SWITCH 1–16 intended for control using the telephone (DTMF). The control
is available to the users having a telephone code. Additionally, the outputs can be
controlled using the user OUTS CONTROL function (see: USER MANUAL).
If an output of the REMOTE SWITCH type is to be controlled from the keypad, it must be
assigned to a group of outputs (see: Output groups p. 68).
If a cut-off time has been programmed for a REMOTE SWITCH type output, the output will
operate similarly to the 24. MONO SWITCH type output.
80. NO GUARD TOUR indicates lack of guard tour.
81. AC LOSS (MAINBOARD) - LONG indicates the loss of AC power supply to the control panel
mainboard, when the trouble lasts long enough to be saved to the event log (see: AC LOSS
REPORT DELAY
parameter p. 75).
82. AC LOSS (EXPANSION MODULE) - LONG indicates the loss of AC power supply to the
modules with power supply unit, when the trouble lasts long enough to be saved to the
event log (the delay is programmed individually in each module).
83. OUTPUTS OFF the output activates when all selected outputs stop signaling.
84. ACCESS CODE ENTERINGindicates the entering the user code.
85. USE OF ACCESS CODEindicates the using a code for arming/disarming.
86. DOOR OPEN INDICATOR indicates the opening the door supervised by a module executing
the access control functions.
87. DOOR TOO LONG OPENED INDICATORindicates the long open door supervised by a module
executing the access control functions.
88. BURGLARY ALARM (NO FIRE AND TAMPER)signals burglary alarms and PANIC alarms from
keypads.
89. 50% OF LOG MEMORY FILLED informs that 50% of the event log area has been filled since
the last event log reading with the DLOADX program.
90. 90% OF LOG MEMORY FILLED informs that 90% of the event log area has been filled since
the last event log reading with the DLOADX program.
91. AUTO-ARM DELAY START signals starting the AUTO-ARMING DELAY countdown for a
programmed time period (see: p. 48).
92. AUTO-ARM DELAY STATUSindicates the AUTO-ARMING DELAY countdown (see: p. 48).
93. UNAUTHORIZED ACCESSsignals unauthorized opening of a door monitored by the module
executing access control functions.
66

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 64 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 64 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel Integra 64

Satel Integra 64 Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel Integra 64 Snelstart handleiding - Nederlands - 24 pagina's

Satel Integra 64 Aanvulling / aanpassing - Nederlands - 121 pagina's

Satel Integra 64 Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 64 Aanvulling / aanpassing - Deutsch - 121 pagina's

Satel Integra 64 Gebruiksaanwijzing - Deutsch - 54 pagina's

Satel Integra 64 Installatiehandleiding - Deutsch - 38 pagina's

Satel Integra 64 Snelstart handleiding - Deutsch - 2 pagina's

Satel Integra 64 Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 64 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info