699074
28
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
26 Installer Manual SATEL
156 43 15 4 3 2
Fig. 15. Connection of the RS-232 ports of control panel and external modem with the PIN5
socket (the SATEL made ETHM-1 / ETHM-1 Plus and GSM modules are connected in a
similar way). Shown on the left is RJ plug to be connected into the control panel mainboard
socket. Shown on the right is PIN5 plug. A ready cable is offered by SATEL company
(RJ/PIN5).
5.14.1 Configuring settings of the modem to be connected to control panel
The MDM56 and MDM56 BO modems, manufactured by SATEL, do not require any
configuration. The factory settings ensure correct work with the control panel.
Before connecting to the control panel, connect the modem to the computer and, using the
Terminal type program, set the correct operating mode.
1. Enter the at command the modem should respond with OK. Otherwise, enter ate1.
If the modem fails to respond, check the modem connection to the computer, and make
sure that the correct COM port is selected in the Terminal program settings.
2. Enter the at&v command. The modem will present a list of parameters to be
programmed (see example in Fig. 16). The parameter block saved as the profile 0(in
Fig. 16 STORED PROFILE 0) should include E1 Q0 V1 X4 &D2 &S0 and S00:000. In
such a case the modem is ready for operation with the control panel.
3. If any parameter is set differently, it should be modified. The parameter setting command
consists of a fixed AT prefix and the desired parameter setting (e.g., if E0 V0 is included in
the profile, the command for setting the proper value will be ate1v1, after which the
modem will answer OK).
4. Enter the at&w0 command to save the settings in the profile 0”.
5. Enter the atz command followed by at&v to check that all parameters are saved
correctly. The settings in ACTIVE PROFILE should be the same as in STORED PROFILE
0 (Note: Often the STORED PROFILE contains less parameters than the ACTIVE
PROFILE, which is normal).
To set the S0 modem register, use the ats0=0 command (in Fig. 16, the modem
register setting is shown in a slightly different notation S00: 000).
When restarting the modem, the control panel gives the ATZ command, which sets the
parameters as stored in the profile 0. For this reason, the current setting of the
parameters mentioned in it. 2 (ACTIVE PROFILE”) is irrelevant, but it is important that
they be set properly in the profile 0”.
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 64 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 64 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 0,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel Integra 64 Plus

Satel Integra 64 Plus Gebruiksaanwijzing - Nederlands - 53 pagina's

Satel Integra 64 Plus Aanvulling / aanpassing - Nederlands - 108 pagina's

Satel Integra 64 Plus Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 64 Plus Gebruiksaanwijzing - Deutsch - 55 pagina's

Satel Integra 64 Plus Aanvulling / aanpassing - Deutsch - 108 pagina's

Satel Integra 64 Plus Installatiehandleiding - Deutsch - 36 pagina's

Satel Integra 64 Plus Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 64 Plus Aanvulling / aanpassing - English - 102 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info