699031
24
Verklein
Vergroot
Pagina terug
1/51
Pagina verder
22 User Manual SATEL
Outputs control allow to control the devices connected to the MONO SWITCH, BI SWITCH,
REMOTE SWITCH, SHUTTER UP and SHUTTER DOWN type outputs (see: Outputs control
p. 35).
Service modeavailable to the installer. Initiates the service mode.
Take SM over available to the installer. If the service mode has been initiated from another
keypad, it can be taken over, i.e. the service menu can be displayed on the keypad, on
which the TAKE SM OVER function has been started.
Downloadingthe following functions are available in the submenu
Start DWNL-RS available to the installer. Enables communication with the DLOADX
program through the RS-232 / USB port of the control panel (local programming).
Finish DWNL-RS available to the installer. Disables the local programming of control
panel.
Start DWNL-MOD. enables communication with the DLOADX program via the external
modem (analog, GSM or ISDN).
Start DWNL-TEL enables communication with the DLOADX program via the 300 bps
modem.
ETHM-1 DLOADX enables communication with the DLOADX program using the
ETHM-1 (firmware version 1.03 or newer) / ETHM-1 Plus module. The communication
takes place over Ethernet. If the INT-GSM module is connected to the ETHM-1 Plus
module and an attempt to establish communication via Ethernet fails, an attempt will be
made to establish communication via GPRS.
ETHM-1 GUARDX enables communication with the GUARDX program using the
ETHM-1 (firmware version 1.03 or newer) / ETHM-1 Plus module. The communication
takes place over Ethernet. If the INT-GSM module is connected to the ETHM-1 Plus
module and an attempt to establish communication via Ethernet fails, an attempt will be
made to establish communication via GPRS.
INT-GSM DLOADX enables communication with the DLOADX program using the
INT-GSM module. The communication takes place via GPRS.
INT-GSM GUARDX enables communication with the GUARDX program using the
INT-GSM module. The communication takes place via GPRS.
5.4 Arming
This section describes the operations that must be carried out by the user from the keypad in
order to initiate the arming procedure. The arming procedure is ended at the running out of
the exit delay time (if the procedure is ended successfully, the system becomes armed see
also Failure of arming procedurep. 24). If the exit delay time is 0, the system becomes
armed instantly.
The installer can configure the alarm system so that the arming functions will not be
available after tamper. A message on the display will indicate that the user must call
for service. The arming functions will not be available until the service code is entered
and confirmed with the key.
5.4.1 Full arming without partition selection
The arming without partition selection is possible when none of the partitions to which the
user has access is armed and the keypad is not signaling any alarm.
1. Enter the code and confirm with the
key
.
2. When the ARM ALL function is displayed, press the
key. The arming procedure will be
initiated in all partitions which are accessible to the user and are operated by the keypad.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 256 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 256 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 1,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel Integra 256 Plus

Satel Integra 256 Plus Snelstart handleiding - Nederlands - 2 pagina's

Satel Integra 256 Plus Aanvulling / aanpassing - Nederlands - 108 pagina's

Satel Integra 256 Plus Gebruiksaanwijzing - Nederlands - 53 pagina's

Satel Integra 256 Plus Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 256 Plus Gebruiksaanwijzing - Deutsch - 55 pagina's

Satel Integra 256 Plus Aanvulling / aanpassing - Deutsch - 108 pagina's

Satel Integra 256 Plus Installatiehandleiding - Deutsch - 36 pagina's

Satel Integra 256 Plus Aanvulling / aanpassing - English - 102 pagina's

Satel Integra 256 Plus Installatiehandleiding - English - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info