699031
85
Verklein
Vergroot
Pagina terug
1/102
Pagina verder
SATEL INTEGRA Plus 83
For each user schedule, you can:
program an individual name (up to 16 characters),
indicate the timers which will determine when the user will have access to the system.
10. Reporting
The control panel can send event codes to the monitoring station using the following
transmission paths:
analog telephone line,
Ethernet (connection of the ETHM-1 Plus / ETHM-1 module to the control panel required),
GPRS (INT-GSM module must be installed in the alarm system or SATEL GSM module
must be connected to the control panel),
SMS (INT-GSM module is required to be installed in the alarm system) the control panel
gets no acknowledgement of event code receipt.
The control panel will try to send event code to the monitoring station using in turn:
1. ETHM-1 Plus / ETHM-1 module and/or INT-GSM module. If several such modules are
connected to the control panel, that with the lowest address will be used. Event code can
be sent via Ethernet, GPRS or SMS.
When configuring the ETHM-1 Plus module to which the INT-GSM module is
connected, or when configuring the INT-GSM module connected directly to the control
panel, define priority of the transmission paths. The transmission path which is not
included in the list defining the priority of transmission paths, will not be used.
2. SATEL GSM module for GPRS transmission.
3. analog telephone line (basic and backup telephone number).
If the event code is successfully sent via one transmission path, the other transmission paths
will not be used.
If sending the event code via one transmission path fails, the control panel will try to send the
event code by using the next transmission path. In the case of reporting via the telephone
line, if the event cannot be sent despite completion of the preprogrammed number of retries,
the control panel will hang up until a next event occurs, or for a specified period of time. After
the time expires, the control panel will make further attempts to send the event.
The reporting parameters can be programmed:
using the keypad, in the service mode, by means of the functions available in the
MONITORING submenu,
using the DLOADX program, in the Reporting” window.
For correct operation, the reporting function may require enabling some system options.
Reporting through the ETHM-1 Plus / ETHM-1 / INT-GSM / GSM modules requires that some
telephone options be enabled and settings of these modules properly configured.
Before you proceed to the programming, obtain from the monitoring station operator all data
necessary to correctly start the reporting function:
depending on the method of sending events:
telephone number of the monitoring station (telephone reporting),
server address, port number, STATION KEY and KEY (ETHM) (reporting through Ethernet
network),
server address, port number, STATION KEY and KEY (GPRS) (GPRS reporting),
telephone number of the monitoring station and SMS message format (SMS reporting),
transmission format required by the monitoring station,
85

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 256 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 256 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel Integra 256 Plus

Satel Integra 256 Plus Snelstart handleiding - Nederlands - 2 pagina's

Satel Integra 256 Plus Aanvulling / aanpassing - Nederlands - 108 pagina's

Satel Integra 256 Plus Gebruiksaanwijzing - Nederlands - 53 pagina's

Satel Integra 256 Plus Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 256 Plus Gebruiksaanwijzing - Deutsch - 55 pagina's

Satel Integra 256 Plus Aanvulling / aanpassing - Deutsch - 108 pagina's

Satel Integra 256 Plus Installatiehandleiding - Deutsch - 36 pagina's

Satel Integra 256 Plus Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 256 Plus Installatiehandleiding - English - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info